[Gate-users] cold phantom

[xcao]

hello, gate users

    I simulation the cold phantom at Gate 6.1, but it seems that it doesn't work.
below is the code:

/gate/world/daughters/name cold_area
/gate/world/daughters/insert cylinder
/gate/cold_area/vis/forceWireframe
/gate/cold_area/vis/setColor green
/gate/cold_area/geometry/setRmax 45.0 mm
/gate/cold_area/geometry/setHeight 6. mm
/gate/cold_area/setMaterial Water

# Water in Phantom
/gate/source/addSource cylinder_0
/gate/source/cylinder_0/setActivity 0.000040757 Ci
/gate/source/cylinder_0/gps/particle gamma
/gate/source/cylinder_0/gps/energytype Mono
/gate/source/cylinder_0/gps/monoenergy 140 keV
/gate/source/cylinder_0/gps/type Volume
/gate/source/cylinder_0/gps/shape Cylinder
/gate/source/cylinder_0/gps/radius 46.5 mm
/gate/source/cylinder_0/gps/halfz 3. mm
/gate/source/cylinder_0/gps/centre 0. 0. 0. mm
/gate/source/cylinder_0/gps/angtype iso
/gate/source/cylinder_0/gps/Forbid cold_area
/gate/source/cylinder_0/dump 1

Is there something wrong?

Best regards 

2012-04-23 



xcao