[gate-users] executing after installation

[yuxuan.zhang at di.mdacc.tmc.edu]

Hi,

According to your post, you haven't install
gate yet. After the "source env_gate.csh",
have you "make" the gate?

 




Sweta <sweta_indbhavan at yahoo.co.in>
Sent by: gate-users-bounces at lphe1pet1.epfl.ch
09/19/2005 09:16 AM
Please respond to sweta_indbhavan; Please respond to GATE feedback and 
helpline for Users 

 
        To:     GATE users <gate-users at lphe1pet1.epfl.ch>
        cc: 
        Subject:        [gate-users] executing after installation


Dear all,
 
I have installed Gate v 2.2.0 and get the following display.
 
$ source env_gate.csh
The current value of G4INSTALL is: /usr/local/geant4.7.0.p01
The current value of G4VERSION is: 7.0

Launching Geant4 configuration script /usr/local/geant4.7.0.p01/env.csh

On this machine the G4SYSTEM=Linux-g++
On this machine the G4INSTALL=/usr/local/geant4.7.0.p01
On this machine the G4LIB=/usr/local/geant4.7.0.p01/lib
On this machine the 
G4LEVELGAMMADATA=/usr/local/geant4.7.0.p01/data/PhotonEvapor
ation
On this machine the 
G4RADIOACTIVEDATA=/usr/local/geant4.7.0.p01/data/RadiativeDe
cay
On this machine the G4LEDATA=/usr/local/geant4.7.0.p01/data/G4EMLOW2.3
On this machine the 
NeutronHPCrossSections=/usr/local/geant4.7.0.p01/data/G4NDL3
.7
On this machine the G4ELASTICDATA=/usr/local/geant4.7.0.p01/data/Elastic
On this machine the CLHEP_BASE_DIR=/usr/local/CLHEP
On this machine the CLHEP_INCLUDE_DIR=/usr/local/CLHEP/include
On this machine the CLHEP_LIB_DIR=/usr/local/CLHEP/lib
On this machine the CLHEP_LIB=CLHEP
On this machine the G4ANALYSIS_USE=1
On this machine the G4UI_BUILD_XAW_SESSION=1
On this machine the G4UI_USE_XAW=1
On this machine the G4UI_BUILD_XM_SESSION=1
On this machine the G4UI_USE_XM=1
On this machine the G4VIS_BUILD_DAWN_DRIVER=1
On this machine the G4VIS_BUILD_OPENGLX_DRIVER=1
On this machine the G4VIS_BUILD_OPENGLXM_DRIVER=1
On this machine the G4VIS_BUILD_OIX_DRIVER=1
On this machine the G4VIS_BUILD_VRML_DRIVER=1
On this machine the G4VIS_USE_DAWN=1
On this machine the G4VIS_USE_OPENGLX=1
On this machine the G4VIS_USE_OPENGLXM=1
On this machine the G4VIS_USE_OIX=1
On this machine the G4VIS_USE_VRML=1
On this machine the OGLHOME=/usr/local/MesaGL
On this machine the G4LIB_BUILD_SHARED=1
On this machine the G4LIB_BUILD_STATIC=1
On this machine the G4LIB_USE_GRANULAR=1
On this machine the G4UI_USE_TCSH=1
In your environment you have the G4WORKDIR=/usr/local/geant4.7.0.p01

Configuring GATE options

G4WORKDIR set to .
G4TMP set to ./tmp
G4BIN set to ./bin
Data analysis and output features enabled
Ascii data output enabled
Checking your LD_LIBRARY_PATH variable...
 ==> OK: /usr/local/bin/root/lib added to your LD_LIBRARY_PATH
Use of ROOT enabled
ROOT real-time plotter disabled
LMF data output disabled
ECAT7 data output disabled
GATEHOME is set to /usr/local/GATE
Checking your path variable...
 ==> OK: /usr/local/GATE/bin/Linux-g++ added to your path variable
G4VERSION4 is not set: GATE will use the code compatible with Geant4 
version >=                        5.0
G4VERSION5_1 is set: GATE will use the run manager compatible with the 
Geant4 ve                       rsion = 5.1
G4VERSION5_2 is set: GATE is compatible with the Geant4 version = 5.2
G4VERSION6_2 is set: GATE is compatible with the Geant4 version = 6.2
G4VERSION7_0 is set: GATE is compatible with the Geant4 version = 7.0

Done
___________________________________________________
 
I am unable to run gate using $ Gate and get the error "Gate": Command not 
found.
 
Please note I have the required tools LMF, ROOT, GEANT4 7.0 and CLHEP 
installed.
 
Regards,
Sweta
Yahoo! India Matrimony: Find your partner now._______________________________________________
gate-users mailing list
gate-users at lphe1pet1.epfl.ch
http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20050919/62788963/attachment.htm>