Hi, According to your post, you haven't install gate yet. After the "source env_gate.csh", have you "make" the gate?   <table width=100%> <tr valign=top> <td> <td>Sweta <sweta_indbhavan@yahoo.co.in> Sent by: gate-users-bounces@lphe1pet1.epfl.ch 09/19/2005 09:16 AM Please respond to sweta_indbhavan; Please respond to GATE feedback and helpline for Users         <td>                To:        GATE users <gate-users@lphe1pet1.epfl.ch>         cc:                 Subject:        [gate-users] executing after installation</table> Dear all,   I have installed Gate v 2.2.0 and get the following display.   $ source env_gate.csh The current value of G4INSTALL is: /usr/local/geant4.7.0.p01 The current value of G4VERSION is: 7.0 Launching Geant4 configuration script /usr/local/geant4.7.0.p01/env.csh On this machine the G4SYSTEM=Linux-g++ On this machine the G4INSTALL=/usr/local/geant4.7.0.p01 On this machine the G4LIB=/usr/local/geant4.7.0.p01/lib On this machine the G4LEVELGAMMADATA=/usr/local/geant4.7.0.p01/data/PhotonEvapor ation On this machine the G4RADIOACTIVEDATA=/usr/local/geant4.7.0.p01/data/RadiativeDe cay On this machine the G4LEDATA=/usr/local/geant4.7.0.p01/data/G4EMLOW2.3 On this machine the NeutronHPCrossSections=/usr/local/geant4.7.0.p01/data/G4NDL3 .7 On this machine the G4ELASTICDATA=/usr/local/geant4.7.0.p01/data/Elastic On this machine the CLHEP_BASE_DIR=/usr/local/CLHEP On this machine the CLHEP_INCLUDE_DIR=/usr/local/CLHEP/include On this machine the CLHEP_LIB_DIR=/usr/local/CLHEP/lib On this machine the CLHEP_LIB=CLHEP On this machine the G4ANALYSIS_USE=1 On this machine the G4UI_BUILD_XAW_SESSION=1 On this machine the G4UI_USE_XAW=1 On this machine the G4UI_BUILD_XM_SESSION=1 On this machine the G4UI_USE_XM=1 On this machine the G4VIS_BUILD_DAWN_DRIVER=1 On this machine the G4VIS_BUILD_OPENGLX_DRIVER=1 On this machine the G4VIS_BUILD_OPENGLXM_DRIVER=1 On this machine the G4VIS_BUILD_OIX_DRIVER=1 On this machine the G4VIS_BUILD_VRML_DRIVER=1 On this machine the G4VIS_USE_DAWN=1 On this machine the G4VIS_USE_OPENGLX=1 On this machine the G4VIS_USE_OPENGLXM=1 On this machine the G4VIS_USE_OIX=1 On this machine the G4VIS_USE_VRML=1 On this machine the OGLHOME=/usr/local/MesaGL On this machine the G4LIB_BUILD_SHARED=1 On this machine the G4LIB_BUILD_STATIC=1 On this machine the G4LIB_USE_GRANULAR=1 On this machine the G4UI_USE_TCSH=1 In your environment you have the G4WORKDIR=/usr/local/geant4.7.0.p01 Configuring GATE options G4WORKDIR set to . G4TMP set to ./tmp G4BIN set to ./bin Data analysis and output features enabled Ascii data output enabled Checking your LD_LIBRARY_PATH variable...  ==> OK: /usr/local/bin/root/lib added to your LD_LIBRARY_PATH Use of ROOT enabled ROOT real-time plotter disabled LMF data output disabled ECAT7 data output disabled GATEHOME is set to /usr/local/GATE Checking your path variable... ==> OK: /usr/local/GATE/bin/Linux-g++ added to your path variable G4VERSION4 is not set: GATE will use the code compatible with Geant4 version >=                        5.0 G4VERSION5_1 is set: GATE will use the run manager compatible with the Geant4 ve                       rsion = 5.1 G4VERSION5_2 is set: GATE is compatible with the Geant4 version = 5.2 G4VERSION6_2 is set: GATE is compatible with the Geant4 version = 6.2 G4VERSION7_0 is set: GATE is compatible with the Geant4 version = 7.0 Done ___________________________________________________   I am unable to run gate using $ Gate and get the error "Gate": Command not found.   Please note I have the required tools LMF, ROOT, GEANT4 7.0 and CLHEP installed.   Regards, Sweta <hr><a href=http://yahoo.shaadi.com/>Yahoo! India Matrimony</a>: Find your partner now.<tt>_______________________________________________ gate-users mailing list gate-users@lphe1pet1.epfl.ch http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users </tt>