[Gate-users] Help : NumberOfPrimaries

[ESLAM TAHA]

Dear Ibrahim,

Regarding the number of primaries, for some reason, you can not exceed 2E9.
If you want to simulate a higher number of primaries, you can run the
simulation multiple times, each time with a different seed number. For
example, if you want to run 4E9, you need to run the simulation twice using
2E9 each time and then combine the results.

Regarding Gatelab, yes it is still working. Did you check the junk/spam
folder?

Although I never had a floating-point exception error in Gate before, from
my experience these errors usually are related to mathematical operations
that are impossible to carry out (i.e dividing a floating-point number by
zero). I think more information regarding your simulation is needed to
understand what is causing this problem.

My regards,
Eslam


On Sun, Nov 7, 2021 at 2:41 AM IBRAHIM AIT OUAGGOU <
ibrahim.aitouaggou at ump.ac.ma> wrote:

> Hi gate users,
>
>
> I tried to launch my macro in a cluster so I was informed to follow some
> steps to set the jobsplitter and Filemerger,  I did what was indicated in
> the Gate userguide,  I fixed the number of split at 5 and I ran the macro
> and I get what is in the picture below, I don't know what does this mean
> and what will be the next step?
> I have another question about Gatelab,  I tried to make an account in the
> website of Gatelab, an activation code was sent to my subscription mail but
> I didn't get it I don't know why, is Gatelab still working or is there
> something I should know about it ?
>
>
> (Due to the capacity of the first message (>9MB). I did some adjustment to
> be approved)
>
> Thank you for your help
>
> On Fri, Nov 5, 2021, 17:41 IBRAHIM AIT OUAGGOU <
> ibrahim.aitouaggou at ump.ac.ma> wrote:
>
>> Hi gate users
>>
>> I tried to launch my macro in a cluster so I was informed to follow some
>> steps to set the jobsplitter and Filemerger,  I did what was indicated in
>> the Gate userguide,  I fixed the number of split at 5 and I ran the macro
>> and I get what is in the picture below, I don't know what does this mean
>> and what will be the next step?
>> I have another question about Gatelab,  I tried to make an account in the
>> website of Gatelab, an activation code was sent to my subscription mail but
>> I didn't get it I don't know why, is Gatelab still working or is there
>> something I should know about it ?
>>
>> Thank you for your help
>>
>>
>> On Sat, Oct 23, 2021, 16:00 IBRAHIM AIT OUAGGOU <
>> ibrahim.aitouaggou at ump.ac.ma> wrote:
>>
>>> Hello everyone
>>>
>>> I m asking for help, I m a beginner in using Gate and use it right now
>>> to simulate pdd and profils of photon beams in radiotherapy,  the problem I
>>> had is in the definition of the number of primaries,  every time I want
>>> make it bigger the simulation crashes, right now I couldn't exceed 2
>>> billion particle and once I try to use a bigger number it crashes without
>>> knowing the causes.
>>> I ll be grateful if I receive advice from you to remedy this problem
>>>
>>> Best regards
>>>
>> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users



-- 
____________
Eng. Eslam Mohammad Taha
Medical Physics Engineer
Nuclear Engineering Department
King Abdulaziz University
Jeddah, Saudi Arabia
Mobile: +966556537833
Email: emtaha at kau.edu.sa <ebarzangy at stu.kau.edu.sa>

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify me immediately and
delete this message from your computer system.   If you are not the
intended recipient you are notified that disclosing, copying, distributing
or taking any action in reliance on the contents of this information is
strictly prohibited.

-- 
Disclaimer: The information contained in this message is intended for the 
addressee only and may contain classified information. If you are not the 
addressee, please delete this message and notify the sender; you should not 
copy or distribute this message or disclose its contents to anyone. Any 
views or opinions expressed in this message are those of the individual(s) 
and not necessarily of the university. No reliance may be placed on this 
message without written confirmation from an authorized representative of 
its contents. No guarantee is implied that this message or any attachment 
is virus free or has not been intercepted and amended. 


إخلاء مسؤليه:  ان 
جميع المعلومات المتضمنة في هذه الرسالة تخص المستلم، وربما تتضمن معلومات 
سرية، واذا لم تكن انت المستلم فالرجاء الغاء الرسالة واشعار المرسل، كما يمنع 
نسخ او توزيع هذه الرسالة او افشاء محتوياتها لاخرين. ويجدر بالعلم ان جميع 
الآراء ووجهات النظر الواردة في هذه الرسالة تعتبر شخصية وليست بالضرورة 
منسوبة للجامعة. كما لايمكن ان يعتمد على هذه الرسالة ما لم تحصل على موافقة 
خطية من المسئول عن محتوياتها. كما لايوجد ضمان بان هذه الرسالة أو مرفقاتها 
خالية من الفيروسات أو انها لم يتم اعتراضها وتعديلها


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20211107/922c8103/attachment.html>