[Gate-users] Creating projections (*.s) from singles extracted from GATE (GATE_SPECT mode) simulation for STIR reconstruction

[Xinjie Cao]

Hi Leonid,

I believe there is a function in STIR which could help you create sinogram
files from GATE output .root file. Just check the STIR documentation and
you will see.

Best,
Xinjie

On Mon, Mar 15, 2021 at 5:24 AM LEONID NKUBA <leonid_nkuba at yahoo.co.uk>
wrote:

> Dear GATE users
>
> I have simulated cylindrical PET and produced a ROOT output (*.root). I
> have written a root macfile to extract the singles based on my own
> algorithms (certain detector combination), and wanted to create sinograms
> file (*.s) which will be an input file in *.hs interfile for SPECT-STIR
> reconstruction
>
> Leonid
>
>
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users



-- 
*....................................................*
*Xinjie Cao*
*M.E. / Ph.D. Candidate*
*Research Project Assistant*
*Department of Electrical and Computer Engineering & Radiology *
*Novel Medical Imaging Technologies Lab*
*Health Science Center Level 8*
*Stony Brook, NY 11794-8460 *
*Tel: +1 (631)202-9445*
you.stonybrook.edu/goldan/people/
*email: **xinjie.cao at stonybroo*k.edu <xinjie.cao at stonybrook.edu>


*....................................................*
It is prohibited to distribute or publish the files attached to any other
people unless you get permission from the writer himself. All rights
reserved.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20210315/387aa21f/attachment.html>