[Gate-users] How to use zubal phantom

[Xinjie Cao]

Hi,

I usually recommend converting the original phantom file, zubal.dat for
example, into .raw binary image. Then you could implement conversion among
different medical image format using Medcon, it is easy to go no matter
with command line or UI. For converting the original 3D phantom file, like
.dat or other format, you could reference the following MATLAB function and
try it with a shot:
https://www.mathworks.com/help/matlab/ref/multibandread.html

Hope this helps, good luck!

Best,
Xinjie

On Mon, Sep 21, 2020 at 2:18 PM Eng. M Pharaon <pharaon_m at hotmail.com>
wrote:

> Dear Xinjie
> Could you suggest for us a referance that could help us in learning how to
> edit and convert photos using Matlab because i am using imageJ and vv4D for
> that
> Regards
> Eng. Pharaon
>
> Sent from my Huawei phone
>
>
> -------- Original message --------
> From: Xinjie Cao <xinjie.cao at stonybrook.edu>
> Date: Mon, Sep 21, 2020, 9:01 PM
> To: Hadi Rezaei <hrezaei.m.ph at gmail.com>,
> gate-users at lists.opengatecollaboration.org
> Subject: Re: [Gate-users] How to use zubal phantom
>
> You can convert the .dat file into any format you need by MATLAB and then
> you could make conversion among different medical image formats (like .img,
> .nii, etc) using MedCon or ImageJ.
>
> Best,
> Xinjie
>
> On Sun, Sep 20, 2020 at 12:20 PM Hadi Rezaei <hrezaei.m.ph at gmail.com>
> wrote:
>
> Dear gate users
> I want to use zubal phantom as a voxelized phantom. The data format that
> exists in
> http://noodle.med.yale.edu/zubal/data.htm link is .dat file. Should I
> convert it to .i33? and How can I do it?
> Thanks
> Best
> Hadi
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20200922/08d036fa/attachment.html>