[Gate-users] Which geometry gives the correct answer

Pietrzyk, Uwe u.pietrzyk at fz-juelich.de
Wed Oct 4 09:27:06 CEST 2017


Hi and good morning,

according to your macro you have 3 volumes at  two different 
positions, while two are at the same.

> /gate/Phantom/placement/setTranslation  0. 3. 0. cm (1)

> /gate/Phantom/placement/setTranslation 0. 0. 0. cm  (2)


> gate/cylinder2/placement/setTranslation  0. 3. 0. cm (??)

also, one volume has material vacuum  an two have plexiglass?

Where did you place the source?

Maybe you check the values again, but from what you have sent,
it is difficult to give advice.

Kind regards,

U. Pietrzyk
/----------------------------------------------------------------------
Prof. Dr. Uwe Pietrzyk
Diplom-Physiker
Institut für Neurowissenschaften und Medizin / INM-4
Forschungszentrum Jülich GmbH
52425 Jülich
Tel: +49-2461-61 4763
Fax: +49-2461-61 2820
Mobil: +49-162-103-4871
eMail: U.Pietrzyk at fz-juelich.de
http://www.fz-juelich.de/inm/inm-4/DE/Home/home_node.html
&
Bergische Universität Wuppertal
Fakultät für Mathematik und Naturwissenschaften
Büro:  D.08.01
Gaußstr. 20
42097 Wuppertal
Tel: +49-(0)202-439-3523
Fax: +49-(0)202-439-2811
eMail: Uwe.Pietrzyk at uni-wuppertal.de
http://www.medizinphysik.uni-wuppertal.de
----------------------------------------------------------------------/

> On 3. Oct 2017, at 22:15, P. T. <ptpphysics at gmail.com> wrote:
> 
> Dear all,
> 
> I simulated a simple point source and detector in opposite side of a
> cylinder as Phantom in vGATE72.
> 
> I defined two geometry for the Phantom.
> 
> First simulation were done with Geo.1 for the Phantom.
> ####################### Geo.1
> /gate/world/daughters/name Phantom
> /gate/world/daughters/insert cylinder
> /gate/Phantom/geometry/setRmax 3 cm
> /gate/Phantom/geometry/setRmin 0. cm
> /gate/Phantom/geometry/setHeight 1 cm
> /gate/Phantom/placement/setTranslation  0. 3. 0. cm <-----------------------
> /gate/Phantom/setMaterial Plexiglass
> 
> ###################################
> 
> The second simulation was done with Geo.2 for the Phantom.
> 
> ######Geo.2
> 
> /gate/world/daughters/name Phantom
> /gate/world/daughters/insert cylinder
> /gate/Phantom/geometry/setRmax 9.75  cm
> /gate/Phantom/geometry/setRmin 0. cm
> /gate/Phantom/geometry/setHeight 2 cm
> /gate/Phantom/placement/setTranslation 0. 0. 0. cm <-----------------------
> /gate/Phantom/setMaterial Vacuum
> 
> 
> /gate/Phantom/daughters/name cylinder2
> /gate/Phantom/daughters/insert cylinder
> /gate/cylinder2/geometry/setRmax 3 cm
> /gate/cylinder2/geometry/setRmin 0. cm
> /gate/cylinder2/geometry/setHeight 1 cm
> /gate/cylinder2/placement/setTranslation  0. 3. 0. cm <-----------------------
> /gate/cylinder2/setMaterial Plexiglass
> ###################################################
> 
> Two geometries are not different, but the energy spectrum is different in
> root output.
> Is it a bug in GATE?
> Which geometry gives me the correct answer?
> 
> Regards,
> P
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20171004/7281bf2e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5022 bytes
Desc: not available
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20171004/7281bf2e/attachment.bin>


More information about the Gate-users mailing list