[Gate-users] ECAT7 for GATE v7.1

[Pete Z. Wu]

Dear Gate Experts,

Please accept my applogies for the prevous post there was some  
incorrect information regarding the configuration of GATE. The cmake  
flags listed below in this post are the ones used to configure and  
build gate. I managed to install Gate v7.1 on my Macbook Pro OSX10.10  
and can run gate by typing “Gate” in the terminal. However, since I’m  
working on simulations for a PET detector. I believe I should have  
included ECAT7 library. My previous attempts to include the  
DGATE_USE_ECAT7=ON flag resulted in unsuccessful process during  
running of cmake.

My current installation configuration settings are:

cmake -DCMAKE_INSTALL_PREFIX=/usr/local/gate_v7.1-install  
-DGATE_DOWNLOAD_BENCHMARKS_DATA=ON -DGATE_DOWNLOAD_EXAMPLES_DATA=OFF  
-DGATE_USE_ECAT7=OFF -DGATE_USE_LMF=OFF -DGATE_USE_OPTICAL=ON  
-DGATE_USE_GPU=OFF -DGATE_USE_GEANT4_UIVIS=ON  
-DGEANT4_USE_SYSTEM_CLHEP=OFF /usr/local/gate_v7.1

Now that I have a working version of gate_v7.1, is there a way to turn  
on the flag for ECAT7 without having to do a fresh installation of GATE?

Your help will be very much appreciated. I appologise once again for  
the mixup.

Many thanks,

Pete














Quoting "Pete Z. Wu" <pzw at ns.ph.liv.ac.uk>:

> Dear Gate Experts,
>
> I recently managed to install Gate v7.1 on my Macbook Pro OSX10.10  
> and can run gate by typing “Gate” in the terminal. However, since  
> I’m working on simulations for a PET detector. I should have  
> included ECAT7 library. My previous attempts to include the  
> DGATE_USE_ECAT7=ON flag resulted in unsuccessful process during  
> running of cmake.
>
> My current installation configuration settings are:
>
> cmake -DCMAKE_INSTALL_PREFIX=/usr/local/gate_v7.1-install  
> -DGATE_DOWNLOAD_BENCHMARKS_DATA=ON -DGATE_DOWNLOAD_EXAMPLES_DATA=ON  
> -DGATE_USE_ECAT7=ON -DGATE_USE_LMF=OFF -DGATE_USE_OPTICAL=ON  
> -DGATE_USE_GPU=OFF -DGATE_USE_GEANT4_UIVIS=ON  
> -DGEANT4_USE_SYSTEM_CLHEP=OFF /usr/local/gate_v7.1
>
> Now that I have a working version of gate_v7.1, is there a way to  
> turn on the flag for ECAT7 without having to do a fresh installation  
> of GATE?
>
> Your help will be very much appreciated.
>
> Many thanks,
>
> Pete
>
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users