[Gate-users] Gate 7.1 compilation error

[Alex Vergara Gil]

Dear Andre

I am seeing that you made use of geant4 9.6 version while the
recommended is 10.1, please check this since there must be 10.1 for
compatibility with gate 7.1

Regards
Alex

2015-04-07 15:18 GMT-04:00, André Miguel Monteiro <ammonteiro at fc.ul.pt>:
> Dear Said,
>
>
> I recompiled geant4.10.1 without multi-thread, corrected the error ​that you
> pointed out, but I am still getting the output that is attached in this
> e-mail after typing "make".​
>
>
> What should I do?
>
>
> Thank you for your attention.
>
>
> Best regards,
>
>
> André
>
>
>
> --------------------------------
> MSc Student in Biomedical and Biophysics Engineering at Faculty of Sciences
> of the University of Lisbon
>
> Institute of Biophysics and Biomedical Engineering
> Faculty of Sciences, University of Lisbon
> Campo Grande
> 1749-016 Lisbon
>
> Room Office: 1.02
> Extension: 20509
> Email: ammonteiro at fc.ul.pt
> LinkedIn Profile: http://linkedin.com/in/andremmonteiro
> Website: http://www.ibeb.fc.ul.pt/
>
>
> ________________________________
> From: Said Kaddouch <saidkaddouch at gmail.com>
> Sent: Tuesday, April 7, 2015 5:37 PM
> To: André Miguel Monteiro
> Subject: Re: [Gate-users] Gate 7.1 compilation error
>
>
>
> Dear André
>
>
> I just installed Gate7.1., I solved the problem like this :
>
> Just locate the error file:
> path_to_geant4/geant4/geant4.9.6.p03-install/include/Geant4/G4NeutronHPVector.hh,
> and locate the error line 403: error: ‘__isnan’ is not a member of ‘std’.
> Change the error std::isnan(...) to isnan(...). Then the error disappears.
>
> see the site below.
>
> http://comments.gmane.org/gmane.comp.science.opengate.user/3996
>
>
> good luck
>
>
> 2015-04-07 16:32 GMT+01:00 André Miguel Monteiro
> <ammonteiro at fc.ul.pt<mailto:ammonteiro at fc.ul.pt>>:
> Dear Alex and Hermann,
>
> I have compiled Gate 7.1, after compiling geant4 without multi-threading
> option, using either make -j4 or make and it gives me similar errors at 76%
> and 69%. I am compiling gate with ecat7 and lmf3.0.
>
> Attached I am sending the full output of gate 7.1 compilation with make
> -j4.
>
> Thank you in advance.
>
> Best regards,
>
> André Miguel Monteiro
>
>
>
> --------------------------------
> MSc Student in Biomedical and Biophysics Engineering at Faculty of Sciences
> of the University of Lisbon
>
> Institute of Biophysics and Biomedical Engineering
> Faculty of Sciences, University of Lisbon
> Campo Grande
> 1749-016 Lisbon
>
> Room Office: 1.02
> Extension: 20509
> Email: ammonteiro at fc.ul.pt<mailto:ammonteiro at fc.ul.pt>
> LinkedIn Profile: http://linkedin.com/in/andremmonteiro
> Website: http://www.ibeb.fc.ul.pt/
>
> ________________________________________
> From: Alex Vergara Gil
> <alexvergaragil at gmail.com<mailto:alexvergaragil at gmail.com>>
> Sent: Monday, April 6, 2015 9:31 PM
> To: Hermann Fuchs
> Cc: André Miguel Monteiro;
> gate-users at lists.opengatecollaboration.org<mailto:gate-users at lists.opengatecollaboration.org>
> Subject: Re: [Gate-users] Gate 7.1 compilation error
>
> "Gate does not support multiple threads."
> I am not agree. I make -j 8 with gate 7.1 with just a few warnings!
> Andrè shall put more info on his request to know better.
>
> Regards
> Alex
>
> 2015-04-06 14:53 GMT-04:00, Hermann Fuchs
> <hermann.fuchs at meduniwien.ac.at<mailto:hermann.fuchs at meduniwien.ac.at>>:
>> Hi,
>>
>> did you compile Gate with more than one thread?
>> Gate does not support multiple threads. Try compiling Gate with make.
>>
>> Cheers,
>> Hermann
>>
>> Am 6. April 2015 18:44:45 MESZ, schrieb "André Miguel Monteiro"
>> <ammonteiro at fc.ul.pt<mailto:ammonteiro at fc.ul.pt>>:
>>>Dear Gate users,
>>>
>>>
>>>I am trying to compile Gate 7.1, but I am getting the following error:
>>>
>>>
>>>[ 76%] Building CXX object
>>>CMakeFiles/Gate.dir/source/physics/src/GateNeutronInelasticPB.cc.o
>>>make[2]: *** [CMakeFiles/Gate.dir/source/physics/src/GateVSource.cc.o]
>>>Error 1
>>>make[2]: *** Waiting for unfinished jobs....
>>>make[1]: *** [CMakeFiles/Gate.dir/all] Error 2
>>>make: *** [all] Error 2?
>>>
>>>Do you what could be the problem?
>>>
>>>Thank you for your attention.
>>>
>>>Best regards,
>>>
>>>André Monteiro
>>>
>>>
>>>
>>>
>>>
>>>--------------------------------
>>>MSc Student in Biomedical and Biophysics Engineering at Faculty of
>>>Sciences of the University of Lisbon
>>>
>>>Institute of Biophysics and Biomedical Engineering
>>>Faculty of Sciences, University of Lisbon
>>>Campo Grande
>>>1749-016 Lisbon
>>>
>>>Room Office: 1.02
>>>Extension: 20509
>>>Email: ammonteiro at fc.ul.pt<mailto:ammonteiro at fc.ul.pt>
>>>LinkedIn Profile: http://linkedin.com/in/andremmonteiro
>>>Website: http://www.ibeb.fc.ul.pt/
>>>
>>>
>>>------------------------------------------------------------------------
>>>
>>>_______________________________________________
>>>Gate-users mailing list
>>>Gate-users at lists.opengatecollaboration.org<mailto:Gate-users at lists.opengatecollaboration.org>
>>>http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>>
>
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org<mailto:Gate-users at lists.opengatecollaboration.org>
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>
>