[Gate-users] Trouble installing GATE
Tuan
huynht4 at mcmaster.ca
Tue Feb 15 16:11:48 CET 2011
Hi Didier,
I just tried your GNUmakefile. The problem still persists. It looks
like it is the exact same as my GNUmakfile.
Thanks,
Tuan Huynh
On Mon, 2011-02-14 at 22:20 +0100, Didier Benoit wrote:
> Tuan,
>
> Could you just test with my GNUmakefile?
>
> Kind Regards,
> Didier
>
>
>
> On Feb 14, 2011, at 9:58 PM, Tuan wrote:
>
> > Hi Didier,
> >
> > That solved the problem with TROOT.h. Thanks a lot. But I still get
> > the following message:
> >
> > tuan at tuan-Inspiron-560:~/GATE_ROOT/gate_v6.0_p01$ make
> > Entering source/arf ...
> > GNUmakefile:8: *** missing separator. Stop.
> > source/arf finished
> > Entering source/geometry ...
> > GNUmakefile:8: *** missing separator. Stop.
> > source/geometry finished
> > Entering source/general ...
> > GNUmakefile:8: *** missing separator. Stop.
> > source/general finished
> > Entering source/digits_hits ...
> > GNUmakefile:8: *** missing separator. Stop.
> > source/digits_hits finished
> > Entering source/physics ...
> > GNUmakefile:8: *** missing separator. Stop.
> > source/physics finished
> > Creating shared library tmp/Linux-g++/Gate/libGate.so ...
> > g++: *.o: No such file or directory
> > make: *** [tmp/Linux-g++/Gate/libGate.so] Error 1
> > tuan at tuan-Inspiron-560:~/GATE_ROOT/gate_v6.0_p01$
> >
> > I don't know what to do about that.
> >
> > Cheers,
> > Tuan Huynh
> >
> >
> >
> > On Mon, 2011-02-14 at 21:45 +0100, Didier Benoit wrote:
> >> Hi Tuan,
> >>
> >>
> >> In the GateCommon.gmk file, could you add this line: CPPFLAGS += -I
> >> $(ROOTSYS)/include, for me the problem is "TROOT.h: No such file or
> >> directory" a path is wrong somewhere.
> >>
> >>
> >> Kind Regards,
> >> Didier
> >>
> >>
> >>
> >> On Feb 14, 2011, at 3:55 PM, Tuan wrote:
> >>
> >>> Hi Didier,
> >>>
> >>> I just tried doing that, but it still gives the exact same error.
> >>>
> >>> Thanks,
> >>> Tuan Huynh
> >>>
> >>> On Sat, 2011-02-12 at 12:00 +0100,
> >>> gate-users-request at lists.opengatecollaboration.org wrote:
> >>>> Send Gate-users mailing list submissions to
> >>>> gate-users at lists.opengatecollaboration.org
> >>>>
> >>>> To subscribe or unsubscribe via the World Wide Web, visit
> >>>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
> >>>> or, via email, send a message with subject or body 'help' to
> >>>> gate-users-request at lists.opengatecollaboration.org
> >>>>
> >>>> You can reach the person managing the list at
> >>>> gate-users-owner at lists.opengatecollaboration.org
> >>>>
> >>>> When replying, please edit your Subject line so it is more
> >>>> specific
> >>>> than "Re: Contents of Gate-users digest..."
> >>>>
> >>>>
> >>>> Today's Topics:
> >>>>
> >>>> 1. Re: Trouble installing GATE (Didier Benoit)
> >>>> 2. Re: ASCII coincidence.dat (Nicolas GUIGNARD)
> >>>>
> >>>>
> >>>> ----------------------------------------------------------------------
> >>>>
> >>>> Message: 1
> >>>> Date: Fri, 11 Feb 2011 15:49:24 +0100
> >>>> From: Didier Benoit <benoit at imnc.in2p3.fr>
> >>>> To: Tuan <huynht4 at mcmaster.ca>
> >>>> Cc: gate-users at lists.opengatecollaboration.org
> >>>> Subject: Re: [Gate-users] Trouble installing GATE
> >>>> Message-ID: <4D554C74.1010408 at imnc.in2p3.fr>
> >>>> Content-Type: text/plain; charset=windows-1252; format=flowed
> >>>>
> >>>> Hi Tuan,
> >>>>
> >>>> Your GATEHOME should be: /home/tuan/GATE_ROOT/gate_v6.0_p01, I
> >>>> think
> >>>> In your PATH variable it's better:
> >>>> export PATH=$PATH:$ROOTSYS/bin:$GATEHOME/bin
> >>>>
> >>>> Kind Regards,
> >>>> Didier
> >>>>
> >>>> On 02/11/2011 03:41 PM, Tuan wrote:
> >>>>> Hi,
> >>>>>
> >>>>> I thought I already set all the environment variables in the
> >>>>> env_gate.sh
> >>>>> file like so:
> >>>>>
> >>>>> export GATEHOME=/home/tuan/GATE_ROOT
> >>>>> export G4INSTALL=/home/tuan/GATE_ROOT/geant4.9.2.p04
> >>>>> export G4VERSION=9.2
> >>>>> export ROOTSYS=/home/tuan/GATE_ROOT/root
> >>>>> export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:
> >>>>> $ROOTSYS/lib:/home/tuan/GATE_ROOT/2.0.4.2/lib
> >>>>> export PATH=$PATH:$ROOTSYS/lib:$GATEHOME/bin/$G4SYSTEM
> >>>>>
> >>>>> Is that incorrect? Is there something else I'm missing?
> >>>>>
> >>>>> Thanks,
> >>>>> Tuan Huynh
> >>>>>
> >>>>>
> >>>>>> Message: 5
> >>>>>> Date: Thu, 10 Feb 2011 21:14:19 +0100
> >>>>>> From: Alexandre Dupas<alexandre.dupas at gmail.com>
> >>>>>> To: gate-users at lists.opengatecollaboration.org
> >>>>>> Subject: Re: [Gate-users] Trouble installing GATE
> >>>>>> Message-ID:
> >>>>>> <AANLkTikWpT8beyrv0NxHwCPGcDFcya7zXTEfRN_Mb3jQ at mail.gmail.com>
> >>>>>> Content-Type: text/plain; charset=UTF-8
> >>>>>>
> >>>>>> Hello,
> >>>>>>
> >>>>>> Actually, you have to define some environment variables to
> >>>>>> allow the
> >>>>>> build system to retrieve the root install directory.
> >>>>>>
> >>>>>> The main variable is ROOTSYS that you can define using
> >>>>>>
> >>>>>> export ROOTSYS=/path/to/root/installation/directory
> >>>>>>
> >>>>>> See for more details the "Setting environment variable"
> >>>>>> section of the
> >>>>>> following page :
> >>>>>> http://minos.phy.bnl.gov/software/rug/rug26.html
> >>>>>>
> >>>>>> I hope this help,
> >>>>>>
> >>>>>> Best regards,
> >>>>>> Alexandre
> >>>>>> --
> >>>>>> Alexandre Dupas
> >>>>>> Postdoctoral Research Fellow
> >>>>>> INSERM U698, Bich?t M?decine Nucl?aire
> >>>>>>
> >>>>>> 2011/2/10 Tuan<huynht4 at mcmaster.ca>:
> >>>>>>> Hi,
> >>>>>>>
> >>>>>>> ? ? I. I've been trying to install GATE on a new
> >>>>>>> system. ?I've followed
> >>>>>>> ? ? ? ?the instructions on the Installation Guide to the
> >>>>>>> letter but I
> >>>>>>> ? ? ? ?keep getting this error when I use make:
> >>>>>>>
> >>>>>>> tuan at tuan-Inspiron-560:~/GATE_ROOT/gate_v6.0_p01$ source
> >>>>>>> env_gate.sh
> >>>>>>>
> >>>>>>> The current value of G4INSTALL
> >>>>>>> is: /home/tuan/GATE_ROOT/geant4.9.2.p04
> >>>>>>> The current value of G4VERSION is: 9.2
> >>>>>>>
> >>>>>>> Launching Geant4 configuration
> >>>>>>> script /home/tuan/GATE_ROOT/geant4.9.2.p04/env.sh
> >>>>>>>
> >>>>>>> On this machine the G4SYSTEM=Linux-g++
> >>>>>>> On this machine the
> >>>>>>> G4INSTALL=/home/tuan/GATE_ROOT/geant4.9.2.p04
> >>>>>>> On this machine the
> >>>>>>> G4INCLUDE=/home/tuan/GATE_ROOT/geant4.9.2.p04/include/
> >>>>>>> On this machine the
> >>>>>>> G4LIB=/home/tuan/GATE_ROOT/geant4.9.2.p04/lib
> >>>>>>> On this machine the
> >>>>>>> G4LEVELGAMMADATA=/home/tuan/GATE_ROOT/geant4.9.2.p04/data/PhotonEvaporation2.0
> >>>>>>> On this machine the
> >>>>>>> G4RADIOACTIVEDATA=/home/tuan/GATE_ROOT/geant4.9.2.p04/data/RadioactiveDecay3.2
> >>>>>>> On this machine the
> >>>>>>> G4LEDATA=/home/tuan/GATE_ROOT/geant4.9.2.p04/data/G4EMLOW6.2
> >>>>>>> On this machine the
> >>>>>>> G4NEUTRONHPDATA=/home/tuan/GATE_ROOT/geant4.9.2.p04/data/G4NDL3.13
> >>>>>>> On this machine the
> >>>>>>> G4ABLADATA=/home/tuan/GATE_ROOT/geant4.9.2.p04/data/G4ABLA3.0
> >>>>>>> On this machine the
> >>>>>>> CLHEP_BASE_DIR=/home/tuan/GATE_ROOT/2.0.4.2
> >>>>>>> On this machine the
> >>>>>>> CLHEP_INCLUDE_DIR=/home/tuan/GATE_ROOT/2.0.4.2/include
> >>>>>>> On this machine the
> >>>>>>> CLHEP_LIB_DIR=/home/tuan/GATE_ROOT/2.0.4.2/lib
> >>>>>>> On this machine the CLHEP_LIB=CLHEP
> >>>>>>> On this machine the G4UI_USE_TCSH=1
> >>>>>>> On this machine the G4VIS_BUILD_OPENGLX_DRIVER=1
> >>>>>>> On this machine the G4VIS_USE_OPENGLX=1
> >>>>>>> On this machine the XMFLAGS=
> >>>>>>> On this machine the XMLIBS=
> >>>>>>> On this machine the XMFLAGS=
> >>>>>>> On this machine the XAWFLAGS=
> >>>>>>> On this machine the XAWLIBS=
> >>>>>>> On this machine the G4LIB_BUILD_STATIC=1
> >>>>>>> On this machine the G4LIB_USE_GRANULAR=1
> >>>>>>>
> >>>>>>> Configuring GATE options
> >>>>>>>
> >>>>>>> G4WORKDIR set to .
> >>>>>>> G4TMP set to ./tmp
> >>>>>>> G4BIN set to ./bin
> >>>>>>> Data analysis and output features enabled
> >>>>>>> Ascii data output enabled
> >>>>>>> Transport and generation of optical photons is disabled
> >>>>>>> Checking your LD_LIBRARY_PATH variable...
> >>>>>>> ?==> OK: /home/tuan/GATE_ROOT/root/lib is already in your
> >>>>>>> LD_LIBRARY_PATH
> >>>>>>> Use of ROOT enabled
> >>>>>>> ROOT real-time plotter disabled
> >>>>>>> LMF data output disabled
> >>>>>>> ECAT7 data output disabled
> >>>>>>> GATEHOME is set to /home/tuan/GATE_ROOT
> >>>>>>> Checking your path variable...
> >>>>>>> ?==> OK: /home/tuan/GATE_ROOT/bin/Linux-g++ added to your
> >>>>>>> path variable
> >>>>>>> Checking your LD_LIBRARY_PATH variable...
> >>>>>>> ?==> OK: /home/tuan/GATE_ROOT/tmp/Linux-g++/Gate added to
> >>>>>>> your path
> >>>>>>> variable
> >>>>>>> G4VERSION9_2 is set: GATE is compatible with the geant4
> >>>>>>> version 9.2
> >>>>>>>
> >>>>>>> Done
> >>>>>>>
> >>>>>>> tuan at tuan-Inspiron-560:~/GATE_ROOT/gate_v6.0_p01$ make
> >>>>>>> Making dependency for file Gate.cc ...
> >>>>>>> ./source/physics/include/GateSourcePhaseSpace.hh:14: fatal
> >>>>>>> error:
> >>>>>>> TROOT.h: No such file or directory
> >>>>>>> compilation terminated.
> >>>>>>> Entering source/arf ...
> >>>>>>> GNUmakefile:8: *** missing separator. ?Stop.
> >>>>>>> source/arf finished
> >>>>>>> Entering source/geometry ...
> >>>>>>> GNUmakefile:8: *** missing separator. ?Stop.
> >>>>>>> source/geometry finished
> >>>>>>> Entering source/general ...
> >>>>>>> GNUmakefile:8: *** missing separator. ?Stop.
> >>>>>>> source/general finished
> >>>>>>> Entering source/digits_hits ...
> >>>>>>> GNUmakefile:8: *** missing separator. ?Stop.
> >>>>>>> source/digits_hits finished
> >>>>>>> Entering source/physics ...
> >>>>>>> GNUmakefile:8: *** missing separator. ?Stop.
> >>>>>>> source/physics finished
> >>>>>>> Creating shared library tmp/Linux-g++/Gate/libGate.so ...
> >>>>>>> g++: *.o: No such file or directory
> >>>>>>> make: *** [tmp/Linux-g++/Gate/libGate.so] Error 1
> >>>>>>> tuan at tuan-Inspiron-560:~/GATE_ROOT/gate_v6.0_p01$
> >>>>>>>
> >>>>>>> It seems like Root wasn't installed properly so I've tried
> >>>>>>> reinstalling
> >>>>>>> it a few times (different versions as well) to no
> >>>>>>> avail. ?What could be
> >>>>>>> the problem?
> >>>>>>>
> >>>>>>> Thanks,
> >>>>>>> Tuan Huynh
> >>>>>>>
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> Gate-users mailing list
> >>>>>>> Gate-users at lists.opengatecollaboration.org
> >>>>>>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
> >>>>>>>
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> Gate-users mailing list
> >>>>> Gate-users at lists.opengatecollaboration.org
> >>>>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
> >>>>
> >>>>
> >>>> --
> >>>> ----------------------------------------------------------------
> >>>> Didier BENOIT, GATE Engineer
> >>>>
> >>>> Imagerie et Mod?lisation en Neurobiologie et Canc?rologie (IMNC)
> >>>> IMNC ? UMR 8165 CNRS ? Universit? Paris 7 ? Universit? Paris 11
> >>>> Campus d?Orsay
> >>>> B?timent 440
> >>>> 91405 ORSAY Cedex
> >>>>
> >>>> T?l : (33) 1 69 15 68 76
> >>>> E-mail : benoit at imnc.in2p3.fr
> >>>> http://www.imnc.in2p3.fr
> >>>> ----------------------------------------------------------------
> >>>>
> >>>>
> >>>>
> >>>> ------------------------------
> >>>>
> >>>> Message: 2
> >>>> Date: Fri, 11 Feb 2011 15:59:32 +0100
> >>>> From: Nicolas GUIGNARD <nicolas.guignard8 at gmail.com>
> >>>> To: Marcin Balcerzyk <m.balcerzyk at pluri.ucm.es>
> >>>> Cc: gate-users at lists.opengatecollaboration.org
> >>>> Subject: Re: [Gate-users] ASCII coincidence.dat
> >>>> Message-ID:
> >>>> <AANLkTin41zR6U9ag=nsphyxuRi8Y2y1VsFLaNxP4TJYE at mail.gmail.com>
> >>>> Content-Type: text/plain; charset=ISO-8859-1
> >>>>
> >>>> Hello Marcin
> >>>> many many thanks for your reply and information.
> >>>> Nicolas
> >>>>
> >>>> On Wed, Feb 9, 2011 at 11:28 AM, Marcin Balcerzyk
> >>>> <m.balcerzyk at pluri.ucm.es>wrote:
> >>>>
> >>>>> Dear Nicolas.
> >>>>>
> >>>>>
> >>>>>
> >>>>> Coincidence.dat and other ascii files have column order
> >>>>> described in Users
> >>>>> Guide. Its order depends very much on the design of your
> >>>>> scanner, so there
> >>>>> is no universal naming.
> >>>>>
> >>>>>
> >>>>>
> >>>>> In my case of scanner I have for Singles.dat the following
> >>>>> columns and
> >>>>> first row of data
> >>>>>
> >>>>> *IDRun*
> >>>>>
> >>>>> *IDEvent*
> >>>>>
> >>>>> *IDSource*
> >>>>>
> >>>>> *AnihX*
> >>>>>
> >>>>> *AnihY*
> >>>>>
> >>>>> *AnihZ*
> >>>>>
> >>>>> *VolID*
> >>>>>
> >>>>> *VolID2*
> >>>>>
> >>>>> *VolID3*
> >>>>>
> >>>>> *VolID4*
> >>>>>
> >>>>> *VolID5*
> >>>>>
> >>>>> *VolID6*
> >>>>>
> >>>>> *TimeStamp*
> >>>>>
> >>>>> *EnergyDep*
> >>>>>
> >>>>> *EventX*
> >>>>>
> >>>>> *EventY*
> >>>>>
> >>>>> *EventZ*
> >>>>>
> >>>>> *ComptPhan*
> >>>>>
> >>>>> *ComptDet*
> >>>>>
> >>>>> *ReyPhan*
> >>>>>
> >>>>> *ReyDet*
> >>>>>
> >>>>> *ComptPhanName*
> >>>>>
> >>>>> *RayPhanName*
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 5
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> -6.26E+00
> >>>>>
> >>>>> -2.27E+00
> >>>>>
> >>>>> 3.57E+00
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 5
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 1.23E-06
> >>>>>
> >>>>> 5.75E-01
> >>>>>
> >>>>> -4.19E+01
> >>>>>
> >>>>> -4.05E+01
> >>>>>
> >>>>> -1.88E+01
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> NULL
> >>>>>
> >>>>> NULL
> >>>>>
> >>>>>
> >>>>>
> >>>>> For coincidence.dat it is first for 1st detector, than for 2nd
> >>>>> (from same
> >>>>> IDEVENT you can see it?s a true coincidence):
> >>>>>
> >>>>> *1IDRun*
> >>>>>
> >>>>> *1IDEvent*
> >>>>>
> >>>>> *1IDSource*
> >>>>>
> >>>>> *1AnihX*
> >>>>>
> >>>>> *1AnihY*
> >>>>>
> >>>>> *1AnihZ*
> >>>>>
> >>>>> *1TimeStamp*
> >>>>>
> >>>>> *1EnergyDep*
> >>>>>
> >>>>> *1EventX*
> >>>>>
> >>>>> *1EventY*
> >>>>>
> >>>>> *1EventZ*
> >>>>>
> >>>>> *1VolID1*
> >>>>>
> >>>>> *1VolID2*
> >>>>>
> >>>>> *1VolID3*
> >>>>>
> >>>>> *1VolID4*
> >>>>>
> >>>>> *1VolID5*
> >>>>>
> >>>>> *1VolID6*
> >>>>>
> >>>>> *1ComptPhan*
> >>>>>
> >>>>> *1ComptDet*
> >>>>>
> >>>>> *1ReyPhan*
> >>>>>
> >>>>> *1ReyDet*
> >>>>>
> >>>>> *1ScannAx*
> >>>>>
> >>>>> *1ScannAng*
> >>>>>
> >>>>> *2IDRun*
> >>>>>
> >>>>> *2IDEvent*
> >>>>>
> >>>>> *2IDSource*
> >>>>>
> >>>>> *2AnihX*
> >>>>>
> >>>>> *2AnihY*
> >>>>>
> >>>>> *2AnihZ*
> >>>>>
> >>>>> *2TimeStamp*
> >>>>>
> >>>>> *2EnergyDep*
> >>>>>
> >>>>> *2EventX*
> >>>>>
> >>>>> *2EventY*
> >>>>>
> >>>>> *2EventZ*
> >>>>>
> >>>>> *2VolID1*
> >>>>>
> >>>>> *2VolID2*
> >>>>>
> >>>>> *2VolID3*
> >>>>>
> >>>>> *2VolID4*
> >>>>>
> >>>>> *2VolID5*
> >>>>>
> >>>>> *2VolID6*
> >>>>>
> >>>>> *2ComptPhan*
> >>>>>
> >>>>> *2ComptDet*
> >>>>>
> >>>>> *2ReyPhan*
> >>>>>
> >>>>> *2ReyDet*
> >>>>>
> >>>>> *2ScannAx*
> >>>>>
> >>>>> *2ScannAng*
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 154
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 5.18E+00
> >>>>>
> >>>>> -1.93E+00
> >>>>>
> >>>>> -1.74E+00
> >>>>>
> >>>>> 4.15E-05
> >>>>>
> >>>>> 4.99E-01
> >>>>>
> >>>>> 3.29E+01
> >>>>>
> >>>>> -5.39E+01
> >>>>>
> >>>>> 6.66E+00
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 3
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0.00E+00
> >>>>>
> >>>>> 0.00E+00
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 154
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 5.18E+00
> >>>>>
> >>>>> ########
> >>>>>
> >>>>> ########
> >>>>>
> >>>>> 4.15E-05
> >>>>>
> >>>>> 4.83E-01
> >>>>>
> >>>>> -2.97E+01
> >>>>>
> >>>>> 6.15E+01
> >>>>>
> >>>>> -1.29E+01
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 7
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0
> >>>>>
> >>>>> 0.00E+00
> >>>>>
> >>>>> 0.00E+00
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> I hope that helps. Surely format of two tables above is lost in
> >>>>> Gate list.
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> Marcin Balcerzyk,
> >>>>>
> >>>>> Unidad Ciclotron,
> >>>>>
> >>>>> Centro Nacional de Aceleradores,
> >>>>>
> >>>>> Universidad de Sevilla,
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> Message: 3
> >>>>>
> >>>>> Date: Tue, 8 Feb 2011 15:18:04 +0100
> >>>>>
> >>>>> From: Nicolas GUIGNARD <nicolas.guignard8 at gmail.com>
> >>>>>
> >>>>> To: gate-users at lists.opengatecollaboration.org
> >>>>>
> >>>>> Subject: Re: [Gate-users] ASCII coincidence.dat analysis
> >>>>>
> >>>>> Message-ID:
> >>>>>
> >>>>> <AANLkTimG_2=swc-UpfEyFUkcCTuxmOiCuMWPqOam0p
> >>>>> +c at mail.gmail.com>
> >>>>>
> >>>>> Content-Type: text/plain; charset=ISO-8859-1
> >>>>>
> >>>>>
> >>>>>
> >>>>> Hello dear All
> >>>>>
> >>>>> I have seen lot of published literature using GATE and its
> >>>>> output
> >>>>> processing in forms of sinogram.That means persons using GATE
> >>>>> have procesed
> >>>>> the GATE ACSII files.But I am really so much surprised why
> >>>>> people don't
> >>>>> answer, share or guide how to do this for a naive user.
> >>>>>
> >>>>>
> >>>>>
> >>>>> Thanks
> >>>>>
> >>>>> Nicolas
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>
> >>>>
> >>>> ------------------------------
> >>>>
> >>>> _______________________________________________
> >>>> Gate-users mailing list
> >>>> Gate-users at lists.opengatecollaboration.org
> >>>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
> >>>>
> >>>> End of Gate-users Digest, Vol 57, Issue 12
> >>>> ******************************************
> >>>
> >>>
> >>> _______________________________________________
> >>> Gate-users mailing list
> >>> Gate-users at lists.opengatecollaboration.org
> >>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
> >>>
> >>
> >> ----------------------------------------------------------------
> >> Didier BENOIT, GATE Engineer
> >> Imagerie et Modélisation en Neurobiologie et Cancérologie (IMNC)
> >> IMNC – UMR 8165 CNRS – Université Paris 7 – Université Paris 11
> >> Campus d’Orsay
> >> Bâtiment 440
> >> 91406 ORSAY Cedex
> >>
> >> Tél : (33) 1 69 15 68 76
> >> E-mail : benoit at imnc.in2p3.fr
> >> http://www.imnc.in2p3.fr
> >> ----------------------------------------------------------------
> >>
> >>
> >>
> >>
> >
> >
>
> ----------------------------------------------------------------
> Didier BENOIT, GATE Engineer
> Imagerie et Modélisation en Neurobiologie et Cancérologie (IMNC)
> IMNC – UMR 8165 CNRS – Université Paris 7 – Université Paris 11
> Campus d’Orsay
> Bâtiment 440
> 91406 ORSAY Cedex
>
> Tél : (33) 1 69 15 68 76
> E-mail : benoit at imnc.in2p3.fr
> http://www.imnc.in2p3.fr
> ----------------------------------------------------------------
>
>
More information about the Gate-users
mailing list