[Gate-users] Re : Re : SPECT intrinsic spatial resolution

[Samuel BURG]

ok,

you don't see any difference between you simulation with spResolution 0.0 and 
3.2mm, because your pixel size and the effect of your collimator is much more 
higher than your spResolution.

if you want to asses anything with a spResolution about Xmm, your pixel has to 
be at least X/3mm (strict minimum) or less, or you won't see a lot about your 
spResolution.

regards,

-----------------------------------------------------------
Samuel Burg


Mail : <samuel_burg at yahoo.fr>
-----------------------------------------------------------
"Aw, come on, who would be so stupid as to insert a cast
to make an error go away without actually fixing the error?"
Apparently everyone. 
-- Raymond Chen --
-----------------------------------------------------------




________________________________
De : "Rajaram, Ramya (H USA)" <ramya.rajaram at siemens.com>
À : gate-users at lists.opengatecollaboration.org
Envoyé le : Jeu 16 septembre 2010, 19h 15min 19s
Objet : Re: [Gate-users] Re :  SPECT intrinsic spatial resolution

I am simulating planar image of a point source, so there is no phantom. Also, I 
have put in only the collimator and the continuous crystal detector - no back 
compartment or any other layers. I output the projection images using the the 
following code:

/gate/output/projection/enable
/gate/output/projection/setFileName file6
/gate/output/projection/pixelSizeX 2.4 mm
/gate/output/projection/pixelSizeY 2.4 mm
/gate/output/projection/pixelNumberX 256
/gate/output/projection/pixelNumberY 256

Thanks,

Ramya




-----Original Message-----
From: Samuel BURG [mailto:samuel_burg at yahoo.fr] 
Sent: Thursday, September 16, 2010 10:35 AM
To: Rajaram, Ramya (H USA); gate-users at lists.opengatecollaboration.org
Subject: Re : [Gate-users] SPECT intrinsic spatial resolution

Yes, GATE do apply a spatial blurring in your projection when using 
/gate/digitizer/Singles/spblurring/setSpresolution

but to help you, we need your full macro file.
also remember that the collimator, phantom scattering and the background 
compartment of the PMT play a lot in sp resolution.

-----------------------------------------------------------
Samuel Burg


Mail : <samuel_burg at yahoo.fr>
-----------------------------------------------------------
"Aw, come on, who would be so stupid as to insert a cast
to make an error go away without actually fixing the error?"
Apparently everyone. 
-- Raymond Chen --
-----------------------------------------------------------


________________________________

De : "Rajaram, Ramya (H USA)" <ramya.rajaram at siemens.com>
À : gate-users at lists.opengatecollaboration.org
Envoyé le : Jeu 16 septembre 2010, 16h 59min 48s
Objet : [Gate-users] SPECT intrinsic spatial resolution

Dear Gaters,

Does GATE really convolve the intrinsic spatial resolution for SPECT? I
have generated 256x256 projection images from two macros, both identical
except for the fact that in one, the spResolution is set to 3.7 mm, in
the other it is set to 0 mm and yet, the two images look identical. A
simple profile also gives me the same system resolution for both - leads
me to think the spResolution is somehow not being convolved -- could
someone please explain/help?

The following code is what I used to set the digitizer up:

/gate/digitizer/Singles/insert adder
/gate/digitizer/Singles/insert blurring
/gate/digitizer/Singles/blurring/setResolution 0.09
/gate/digitizer/Singles/blurring/setEnergyOfReference 140. keV
/gate/digitizer/Singles/insert spblurring
/gate/digitizer/Singles/spblurring/setSpresolution 0. mm (3.7 mm)
/gate/digitizer/Singles/spblurring/verbose 2
/gate/digitizer/Singles/insert thresholder
/gate/digitizer/Singles/thresholder/setThreshold 50. keV
/gate/digitizer/Singles/insert upholder
/gate/digitizer/Singles/upholder/setUphold 200. keV

Thank you very much,

Ramya

----------------------------------------------------------------------------
This message and any included attachments are from Siemens Medical Solutions 
and are intended only for the addressee(s). 
The information contained herein may include trade secrets or privileged or 
otherwise confidential information. Unauthorized review, forwarding, printing, 
copying, distributing, or using such information is strictly prohibited and may 
be unlawful. If you received this message in error, or have reason to believe 
you are not authorized to receive it, please promptly delete this message and 
notify the sender by e-mail with a copy to Central.SecurityOffice at siemens.com 

Thank you
_______________________________________________
Gate-users mailing list
Gate-users at lists.opengatecollaboration.org
http://lists.opengatecollaboration.org/mailman/listinfo/gate-users


_______________________________________________
Gate-users mailing list
Gate-users at lists.opengatecollaboration.org
http://lists.opengatecollaboration.org/mailman/listinfo/gate-users