[Gate-users] Fwd: Error in GateApplicationMgr
sebnem erturk
sebnem.erturk at gmail.com
Mon May 17 17:41:59 CEST 2010
Didier,
I tried first 2nd config, my log file is in attached, it gives application
error messages?
Then, what is wrong with it?
My activity is 1x10^10 Bq for each point source, I do not get it?
Cheers,
Sebnem
On Mon, May 17, 2010 at 5:24 PM, Didier Benoit <benoit at cppm.in2p3.fr> wrote:
> Sebnem,
>
> The 2nd config is correct.
>
> Kind Regards,
> Didier
>
> On May 17, 2010, at 5:18 PM, sebnem erturk wrote:
>
> Hello Didier,
>
> Thank you very much for your reply and information.
>
>
> Currently, I am doing static SPECT Acquisition for a 1 sec. and 1 single
> projection .
>
> Below config is correct or should I change for that aim ?
>
> ##########################1st config
> ###########################################
>
> */gate/application/setTimeSlice 0.0 s ???*
> /gate/application/setTimeStart 0. s
> /gate/application/setTimeStop 1.0 s
>
>
> Because my old paramater was like this and I got applicaiton error
> messages.
>
> ######################## 2nd config
> ###########################################
>
> */gate/application/setTimeSlice 1.0 s ???*
> /gate/application/setTimeStart 0. s
> /gate/application/setTimeStop 1.0 s
>
>
> Maybe I did wrong in that part???
>
> Which one is correct 1st or 2nd config?
>
> Kind regards,
>
> Sebnem
>
>
>
> On Mon, May 17, 2010 at 4:50 PM, Didier Benoit <benoit at cppm.in2p3.fr>
> wrote:
> > Hi Sebnem,
> >
> > Could you check if you have not a problem in the declaration of your Time
> Slice, Time Start or Time Stop ?
> >
> > Kind Regards,
> > Didier
> >
> > On May 17, 2010, at 2:58 PM, sebnem erturk wrote:
> >
> >> Hello All,
> >>
> >> What I have to do solve the error related with the Gate application
> manager?
> >>
> >> What is wrong with it?
> >>
> >> Any ideas?
> >>
> >> Regards,
> >>
> >> Sebnem
> >>
> >> [G4] AugerTransitionTable complete
> >> [Acquisition-0] Slice 1 from 1 to 1 s [slice=0 s], final stop at 1 s.
> >> <!> *** WARNING *** <!> Warning in GateApplicationMgr::GetTimeSlice,
> >> run=1 is greater than the list of slices. Do nothing
> >>
> >> [Acquisition-0] Slice 2 from 1 to 0 s [slice=2.31781e-319 s], final stop
> at 1 s.
> >> <!> *** WARNING *** <!> Warning in GateApplicationMgr::GetTimeSlice,
> >> run=2 is greater than the list of slices. Do nothing
> >>
> >> src/GateApplicationMgr.cc (l.220): Error in
> >> GateApplicationMgr::GetTimeSlice, run=2
> >>
> >>
> >>
> >>
> >> ---------- Forwarded message ----------
> >> From: sebnem erturk <sebnem.erturk at gmail.com>
> >> Date: Sun, May 16, 2010 at 4:43 PM
> >> Subject: Error in GateApplicationMgr
> >> To: gate-users at lists.opengatecollaboration.org
> >>
> >>
> >> Hi All,
> >>
> >> I am doing static SPECT Acquisiton by using 27point sources in
> >> transaxial axis of our scanner with Gate_v6_p01 for only one second
> >> and 1 projection.
> >>
> >> My macro is giving below warning and error messages.
> >>
> >> What should I do?
> >>
> >> G4] AugerTransitionTable complete
> >> [Acquisition-0] Slice 1 from 1 to 1 s [slice=0 s], final stop at 1 s.
> >> <!> *** WARNING *** <!> Warning in GateApplicationMgr::GetTimeSlice,
> >> run=1 is greater than the list of slices. Do nothing
> >>
> >> [Acquisition-0] Slice 2 from 1 to 0 s [slice=2.31781e-319 s], final stop
> at 1 s.
> >> <!> *** WARNING *** <!> Warning in GateApplicationMgr::GetTimeSlice,
> >> run=2 is greater than the list of slices. Do nothing
> >>
> >> src/GateApplicationMgr.cc (l.220): Error in
> >> GateApplicationMgr::GetTimeSlice, run=2
> >>
> >> [G4] WARNING - Attempt to delete the physical volume store while
> >> geometry closed !
> >> [G4] WARNING - Attempt to delete the logical volume store while
> >> geometry closed !
> >> [G4] WARNING - Attempt to delete the solid store while geometry closed !
> >> [G4] WARNING - Attempt to delete the region store while geometry closed
> !
> >>
> >> Regards,
> >> --
> >> Sebnem
> >>
> >>
> >>
> >> --
> >> Sebnem Erturk
> >> University of Pisa
> >> Applied Physics Dpt.
> >> Largo Pontecorvo
> >> 56127 Pisa-Italy
> >> Office :0039 050 2214346
> >> Mobile :0039 345 3331440
> >> http://www.df.unipi.it/~fiig/ <http://www.df.unipi.it/%7Efiig/>
> >> _______________________________________________
> >> Gate-users mailing list
> >> Gate-users at lists.opengatecollaboration.org
> >> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
> >
> > ----------------------------------------------------------------
> > Didier BENOIT, Ingénieur GATE
> > Imagerie et Modélisation en Neurobiologie et Cancérologie (IMNC)
> > IMNC – UMR 8165 CNRS – Université Paris 7 – Université Paris 11
> > Campus d’Orsay
> > Bâtiment 440
> > 91406 ORSAY Cedex
> >
> > Tél : (33) 1 69 15 68 76
> > E-mail : benoit at imnc.in2p3.fr
> > http://www.imnc.in2p3.fr
> > ----------------------------------------------------------------
> >
> >
> >
>
>
>
> --
> Sebnem Erturk
> University of Pisa
> Applied Physics Dpt.
> Largo Pontecorvo
> 56127 Pisa-Italy
> Office :0039 050 2214346
> Mobile :0039 345 3331440
> http://www.df.unipi.it/~fiig/ <http://www.df.unipi.it/%7Efiig/>
>
>
> ----------------------------------------------------------------
> Didier BENOIT, Ingénieur GATE
> Imagerie et Modélisation en Neurobiologie et Cancérologie (IMNC)
> IMNC – UMR 8165 CNRS – Université Paris 7 – Université Paris 11
> Campus d’Orsay
> Bâtiment 440
> 91406 ORSAY Cedex
>
> Tél : (33) 1 69 15 68 76
> E-mail : benoit at imnc.in2p3.fr
> http://www.imnc.in2p3.fr
> ----------------------------------------------------------------
>
>
>
--
Sebnem Erturk
University of Pisa
Applied Physics Dpt.
Largo Pontecorvo
56127 Pisa-Italy
Office :0039 050 2214346
Mobile :0039 345 3331440
http://www.df.unipi.it/~fiig/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: log.dat
Type: application/octet-stream
Size: 19450 bytes
Desc: not available
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20100517/c8872dbf/attachment-0001.obj>
More information about the Gate-users
mailing list