[Gate-users] Fwd: Error in GateApplicationMgr

[Didier Benoit]

Sebnem,

The 2nd config is correct.

Kind Regards,
Didier

On May 17, 2010, at 5:18 PM, sebnem erturk wrote:

> Hello Didier,
> 
> Thank you very much for your reply and information.
> 
> 
> Currently, I am doing static SPECT Acquisition for a 1 sec. and 1 single projection .
> 
> Below config is correct  or should I change for that  aim ?
> 
> ##########################1st config ###########################################
> 
> /gate/application/setTimeSlice      0.0  s ???
> /gate/application/setTimeStart      0.   s
> /gate/application/setTimeStop       1.0  s
> 
> 
> Because my old paramater was like this and I got applicaiton error messages.
> 
> ######################## 2nd config ###########################################
> 
> /gate/application/setTimeSlice      1.0  s ???
> /gate/application/setTimeStart      0.   s
> /gate/application/setTimeStop       1.0  s
> 
> 
> Maybe I did wrong  in that part???
> 
> Which one is correct 1st or 2nd config?
> 
> Kind regards,
> 
> Sebnem
> 
> 
> 
> On Mon, May 17, 2010 at 4:50 PM, Didier Benoit <benoit at cppm.in2p3.fr> wrote:
> > Hi Sebnem,
> >
> > Could you check if you have not a problem in the declaration of your Time Slice, Time Start or Time Stop ?
> >
> > Kind Regards,
> > Didier
> >
> > On May 17, 2010, at 2:58 PM, sebnem erturk wrote:
> >
> >> Hello All,
> >>
> >> What I have to do solve the error related with the Gate application manager?
> >>
> >> What is wrong with it?
> >>
> >> Any ideas?
> >>
> >> Regards,
> >>
> >> Sebnem
> >>
> >> [G4] AugerTransitionTable complete
> >> [Acquisition-0] Slice 1 from 1 to 1 s [slice=0 s], final stop at 1 s.
> >> <!> *** WARNING *** <!>  Warning in GateApplicationMgr::GetTimeSlice,
> >> run=1 is greater than the list of slices. Do nothing
> >>
> >> [Acquisition-0] Slice 2 from 1 to 0 s [slice=2.31781e-319 s], final stop at 1 s.
> >> <!> *** WARNING *** <!>  Warning in GateApplicationMgr::GetTimeSlice,
> >> run=2 is greater than the list of slices. Do nothing
> >>
> >> src/GateApplicationMgr.cc (l.220): Error in
> >> GateApplicationMgr::GetTimeSlice, run=2
> >>
> >>
> >>
> >>
> >> ---------- Forwarded message ----------
> >> From: sebnem erturk <sebnem.erturk at gmail.com>
> >> Date: Sun, May 16, 2010 at 4:43 PM
> >> Subject: Error in GateApplicationMgr
> >> To: gate-users at lists.opengatecollaboration.org
> >>
> >>
> >> Hi All,
> >>
> >> I am doing static SPECT Acquisiton by using 27point sources in
> >> transaxial axis of our scanner with Gate_v6_p01 for only one second
> >> and 1 projection.
> >>
> >> My macro is giving below warning and error messages.
> >>
> >> What should I do?
> >>
> >> G4] AugerTransitionTable complete
> >> [Acquisition-0] Slice 1 from 1 to 1 s [slice=0 s], final stop at 1 s.
> >> <!> *** WARNING *** <!>  Warning in GateApplicationMgr::GetTimeSlice,
> >> run=1 is greater than the list of slices. Do nothing
> >>
> >> [Acquisition-0] Slice 2 from 1 to 0 s [slice=2.31781e-319 s], final stop at 1 s.
> >> <!> *** WARNING *** <!>  Warning in GateApplicationMgr::GetTimeSlice,
> >> run=2 is greater than the list of slices. Do nothing
> >>
> >> src/GateApplicationMgr.cc (l.220): Error in
> >> GateApplicationMgr::GetTimeSlice, run=2
> >>
> >> [G4] WARNING - Attempt to delete the physical volume store while
> >> geometry closed !
> >> [G4] WARNING - Attempt to delete the logical volume store while
> >> geometry closed !
> >> [G4] WARNING - Attempt to delete the solid store while geometry closed !
> >> [G4] WARNING - Attempt to delete the region store while geometry closed !
> >>
> >> Regards,
> >> --
> >> Sebnem
> >>
> >>
> >>
> >> --
> >> Sebnem Erturk
> >> University of Pisa
> >> Applied Physics Dpt.
> >> Largo Pontecorvo
> >> 56127 Pisa-Italy
> >> Office :0039 050 2214346
> >> Mobile :0039 345 3331440
> >> http://www.df.unipi.it/~fiig/
> >> _______________________________________________
> >> Gate-users mailing list
> >> Gate-users at lists.opengatecollaboration.org
> >> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
> >
> > ----------------------------------------------------------------
> > Didier BENOIT, Ingénieur GATE
> > Imagerie et Modélisation en Neurobiologie et Cancérologie (IMNC)
> > IMNC – UMR 8165 CNRS – Université Paris 7 – Université Paris 11
> > Campus d’Orsay
> > Bâtiment 440
> > 91406 ORSAY Cedex
> >
> > Tél : (33) 1 69 15 68 76
> > E-mail : benoit at imnc.in2p3.fr
> > http://www.imnc.in2p3.fr
> > ----------------------------------------------------------------
> >
> >
> >
> 
> 
> 
> -- 
> Sebnem Erturk
> University of Pisa
> Applied Physics Dpt.
> Largo Pontecorvo
> 56127 Pisa-Italy
> Office :0039 050 2214346
> Mobile :0039 345 3331440
> http://www.df.unipi.it/~fiig/
> 

----------------------------------------------------------------
Didier BENOIT, Ingénieur GATE
Imagerie et Modélisation en Neurobiologie et Cancérologie (IMNC)
IMNC – UMR 8165 CNRS – Université Paris 7 – Université Paris 11
Campus d’Orsay
Bâtiment 440
91406 ORSAY Cedex
 
Tél : (33) 1 69 15 68 76
E-mail : benoit at imnc.in2p3.fr
http://www.imnc.in2p3.fr
----------------------------------------------------------------