[Gate-users] Disabling .dat output for ECAT system

[Bryan McIntosh]

Hi Naser,

It sounds like you disabled the ROOT output, but forgot to disable the
ASCII output for your simulation.  You can do that via the command:

/gate/output/ascii/disable

By doing this and disabling the ROOT output like you have already, the
only output you'll get will be the sinogram files.

Cheers,

-Bryan

> Message: 2
> Date: Sat, 1 May 2010 10:30:02 -0500
> From: Naser Darwish <naser.darwish at gmail.com>
> Subject: [Gate-users] disabling .dat file for ecat
> To: gate-users at lists.opengatecollaboration.org
> Message-ID:
>        <z2z48b9aacc1005010830m5a06753fg1321af0924339077 at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
>
> Dear gate users,
>
> I am trying to do simulation with ECAT type scanner and NEMA IQ 2001
> phantom. I have enabled sinogram output, but all the gate data files size
> for coincidences, scatter, or delayed are on the order of 2e10 and grow with
> longer scan time. Is there a way to not allow the the files to grow in size
> or disable the data files from being generated. I disabled root output but I
> still run out of space. I only need the the sinogram.ima file Any
> suggestions would be helpful.
>
> Best regards,
>
> Naser
>
>
> ------------------------------
>
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>
> End of Gate-users Digest, Vol 48, Issue 2
> *****************************************
>