[Gate-users] RE : Dose_calculation_GATE6

[AliAsghar Parach]

Dear Jan
by use of parameterisedBoxMatrix the dose calculated in each pixel but
in compressed or regular matrix the dose deposition in each line and
slice,respectively, calculated and saved in doseoutput file. but i
require dose deposition in each pixel, not in each line or slice?
how can I solve this problem?
I mentioned this previously, after GATE5.0.0 release.

On 3/2/10, JAN Sebastien <sebastien.jan at cea.fr> wrote:
> Hi,
> The parametrisedBoxMatrix mode is disabled since the V5 version. You need to
> use the compress or regular matrix mode.
> Hope this help
>
> Cheers
> Seb
>
> ________________________________
>
> De: gate-users-bounces at lists.opengatecollaboration.org de la part de
> AliAsghar Parach
> Date: mar. 02/03/2010 08:05
> À: Simon Stute
> Cc: gate-users at lists.opengatecollaboration.org
> Objet : Re: [Gate-users] Dose_calculation_GATE6
>
>
>
> Dear Simon
> I used GATE6 voxel phantom example(brain) and I used parameterisedBoxMatrix
> to collecting dose(as i used for GATE4.0.0)
>
> regards
>
> On Mon, Mar 1, 2010 at 6:57 PM, Simon Stute <gate.stute at gmail.com> wrote:
>
>> Hi,
>>
>> What type of volume do you use for your voxelized geometry ?
>>
>> Simon
>>
>> On Mon, Mar 1, 2010 at 3:41 PM, AliAsghar Parach
>> <aaparach at gmail.com>wrote:
>>
>>> Dear Gaters,
>>> I installed GATE6.0.0 correctly. I have 2 question about running:
>>> 1- when I ran it for dose calculation in voxel_phantom the output file
>>> was
>>> created but it was empty and No any dose collected in any pixel of
>>> phantom.
>>> (in attachment there is output dose file and it's uncertainty files). in
>>> GATE4.0.0 I used /gate/geometry/enableAutoUpdate for dose calculation.
>>> but
>>> according to GATE6.0.0 release Note:
>>>
>>> "  Regarding the geometry description : all commands related to the
>>> "updating" are removed ,
>>>  - User should remove /gate/geometry/enableAutoUpdate from the macro
>>> file."
>>>
>>> we can't use this command and gate give the following error:
>>>
>>> [G4-cerr] ***** COMMAND NOT FOUND </gate/geometry/enableAutoUpdate> *****
>>> [Gate] Sorry, error in a macro command : abort.
>>>
>>> how can i solve this problem in GATE6.0.0?
>>>
>>> 2- the gate prompt is idle> instead of preInt>,  is it a problem for
>>> GATE6
>>> running and it's results?
>>
>>
>>>
>>> regards
>>>
>>> --
>>> Ali Asghar Parach,Ph.D. student in Medical Physics,Tarbiat Modares
>>> University,Tehran,Iran
>>>
>>> _______________________________________________
>>> Gate-users mailing list
>>> Gate-users at lists.opengatecollaboration.org
>>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>>>
>>
>>
>
>
> --
> Ali Asghar Parach,Ph.D. student in Medical Physics,Tarbiat Modares
> University,Tehran,Iran
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>
>
>


-- 
Ali Asghar Parach,Ph.D. student in Medical Physics,Tarbiat Modares
University,Tehran,Iran