[Gate-users] layer1 doesn't detect anything

[Philipp Fensterseifer]

Hi there,
I am running PET simulations. Unfortunately, layer1 (LuYAP-70) does not
get any hits.
Can you think of a reason for this behaviour ? There are no error
messages when I run it
Here are the macros for the PET and the attach file. Any ideas ?

# Sektor
/gate/cylindricalPET/daughters/name rsector
/gate/cylindricalPET/daughters/insert box
/gate/rsector/placement/setTranslation 77.85 0 -4.6 mm
/gate/rsector/geometry/setXLength 20 mm
/gate/rsector/geometry/setYLength 18.1 mm
/gate/rsector/geometry/setZLength 100.9 mm
/gate/rsector/setMaterial Air
/gate/rsector/vis/setColor yellow
/gate/rsector/vis/forceWireframe

# Modul
/gate/rsector/daughters/name modul
/gate/rsector/daughters/insert box
/gate/modul/geometry/setXLength 20 mm
/gate/modul/geometry/setYLength 18.1 mm
/gate/modul/geometry/setZLength 100.9 mm
/gate/modul/setMaterial Air
/gate/modul/vis/setColor yellow
/gate/modul/vis/forceWireframe

# Submodul
/gate/modul/daughters/name submodul
/gate/modul/daughters/insert box
/gate/submodul/geometry/setXLength 20 mm
/gate/submodul/geometry/setYLength 18.1 mm
/gate/submodul/geometry/setZLength 18.1 mm
/gate/submodul/setMaterial Air
/gate/submodul/vis/setColor green
/gate/submodul/vis/forceWireframe

# Kristall
/gate/submodul/daughters/name crystal
/gate/submodul/daughters/insert box
/gate/crystal/geometry/setXLength 20 mm
/gate/crystal/geometry/setYLength 2 mm
/gate/crystal/geometry/setZLength 2 mm
/gate/crystal/setMaterial Air
/gate/crystal/vis/setColor white
/gate/crystal/vis/forceWireframe

# LSO Layer
/gate/crystal/daughters/name LSO
/gate/crystal/daughters/insert box
/gate/LSO/geometry/setXLength 10 mm
/gate/LSO/geometry/setYLength 2 mm
/gate/LSO/geometry/setZLength 2 mm
/gate/LSO/placement/setTranslation -5 0 0 mm
/gate/LSO/setMaterial LSO
/gate/LSO/vis/setColor blue

# LuYAP Layer
/gate/crystal/daughters/name LuYAP
/gate/crystal/daughters/insert box
/gate/LuYAP/geometry/setXLength 10 mm
/gate/LuYAP/geometry/setYLength 2 mm
/gate/LuYAP/geometry/setZLength 2 mm
/gate/LuYAP/placement/setTranslation 5 0 0 mm
/gate/LuYAP/setMaterial LuYAP-70
/gate/LuYAP/vis/setColor white

# Repeater Kristall
/gate/crystal/repeaters/insert cubicArray
/gate/crystal/cubicArray/setRepeatNumberX 1
/gate/crystal/cubicArray/setRepeatNumberY 8
/gate/crystal/cubicArray/setRepeatNumberZ 8
/gate/crystal/cubicArray/setRepeatVector 0 2.3 2.3 mm

# Repeater Submodul
/gate/submodul/repeaters/insert cubicArray
/gate/submodul/cubicArray/setRepeatNumberX 1
/gate/submodul/cubicArray/setRepeatNumberY 1
/gate/submodul/cubicArray/setRepeatNumberZ 4
/gate/submodul/cubicArray/setRepeatVector 0 0 27.6 mm

# Repeater RSektor
/gate/rsector/repeaters/insert ring
/gate/rsector/ring/setRepeatNumber 20
/gate/rsector/ring/setModuloNumber 2
/gate/rsector/ring/setZShift2 9.2 mm

 
# ATTACH COMPONENTS

/gate/systems/cylindricalPET/rsector/attach rsector
/gate/systems/cylindricalPET/module/attach modul
/gate/systems/cylindricalPET/submodule/attach submodul
/gate/systems/cylindricalPET/crystal/attach crystal
/gate/systems/cylindricalPET/layer0/attach LSO
/gate/systems/cylindricalPET/layer1/attach LuYAP
/gate/LSO/attachCrystalSD
/gate/LuYAP/attachCrystalSD


-------------------------------------------------------------------
-------------------------------------------------------------------
Forschungszentrum Jülich GmbH
52425 Jülich

Sitz der Gesellschaft: Jülich
Eingetragen im Handelsregister des Amtsgerichts Düren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDir'in Bärbel Brumme-Bothe
Geschäftsführung: Prof. Dr. Achim Bachem (Vorsitzender),
Dr. Ulrich Krafft (stellv. Vorsitzender), Prof. Dr. Harald Bolt,
Dr. Sebastian M. Schmidt
-------------------------------------------------------------------
-------------------------------------------------------------------