[Gate-users] Gate digitizer error---update

[Sonal Ambwani]

benchmarkPET.mac works after disabling the root output completely.
Please help!


Quoting Sonal Ambwani <ambwani at bu.edu>:

> Hi again,
>
> I am getting the same error for benchmarkPET. I guess it might help to
> mention the macro here:
>
> ###GATE : benchmarkPET.mac
> /gate/world/geometry/setXLength 150. cm
> /gate/world/geometry/setYLength 150. cm
> /gate/world/geometry/setZLength 150. cm
>
> /control/execute camera.mac
>
> /control/execute phantom.mac
>
> /control/execute physics.mac
>
> #       I N I T I A L I Z E
> /gate/systems/cylindricalPET/verbose 0
> /gate/geometry/enableAutoUpdate
> /run/initialize
>
>
> /gate/digitizer/Singles/insert adder
> /gate/digitizer/Singles/insert readout
> /gate/digitizer/Singles/readout/setDepth 1
> /gate/digitizer/Singles/insert blurring
> /gate/digitizer/Singles/blurring/setResolution 0.26
> /gate/digitizer/Singles/blurring/setEnergyOfReference 511. keV
> /gate/digitizer/Singles/insert thresholder
> /gate/digitizer/Singles/thresholder/setThreshold 350. keV
> /gate/digitizer/Singles/insert upholder
> /gate/digitizer/Singles/upholder/setUphold 650. keV
>
>
>
> #       C O I N C I    S O R T E R
> /gate/digitizer/Coincidences/setWindow 120. ns
> /gate/digitizer/Coincidences/MultiplesPolicy  takeWinnerOfGoods
>
> /gate/digitizer/name delay
> /gate/digitizer/insert coincidenceSorter
> /gate/digitizer/delay/setWindow 120. ns
> /gate/digitizer/delay/setOffset 500. ns
> /gate/digitizer/delay/MultiplesPolicy  takeWinnerOfGoods
>
> /control/verbose 0
> /grdm/verbose 0
> /run/verbose 0
> /event/verbose 0
> /tracking/verbose 0
> /gate/application/verbose 0
> /gate/generator/verbose 0
> /gate/stacking/verbose 0
> /gate/event/verbose 0
> /gate/source/verbose 0
>
> /control/execute sources.mac
>
> #       O U T P U T
>
> /gate/output/verbose 0
>
>
> /gate/output/ascii/setOutFileHitsFlag 1
> /gate/output/ascii/setOutFileSinglesFlag 1
> /gate/output/ascii/setOutFileCoincidencesFlag 1
> /gate/output/ascii/setOutFiledelayFlag 1
>
> /gate/output/root/setFileName benchmarkPET
> /gate/output/root/setRootHitFlag 0
> /gate/output/root/setRootSinglesFlag 0
> /gate/output/root/setRootCoincidencesFlag 1
> /gate/output/root/setRootdelayFlag 1
> /gate/output/root/setRootNtupleFlag 0
> /gate/output/root/setSaveRndmFlag 0
>
>
> #       S T A R T
> /gate/application/setTimeSlice     120. s
> /gate/application/setTimeStart     0.  s
> /gate/application/setTimeStop      240. s
> /gate/application/startDAQ
>
>
>
> Quoting Sonal Ambwani <ambwani at bu.edu>:
>
>> Dear Gate-users,
>>
>> I am suddenly getting the following error while running benchmarkSPECT :
>>
>> /gate/physics/setXRayCut 200. keV
>> /gate/physics/setElectronCut 1. km
>> /gate/physics/setDeltaRayCut 1. GeV
>> /run/initialize
>> WARNING !
>>   SetCutValueForOthers became obsolete.
>>   It is harmless to remove this invokation without any side effects.
>>   This dummy method implementation will be removed soon.
>> /gate/digitizer/Singles/insert adder
>> ***** COMMAND NOT FOUND </gate/digitizer/Singles/insert adder> *****
>>
>> ***** Batch is interupted!! *****
>> Idle>
>>
>> Can someone please point out what might be wrong. This was working till
>> a few days ago.
>>
>> Sonal Ambwani
>>
>> Dept. of Electrical and Computer Engineering
>> Boston University
>>
>> _______________________________________________
>> Gate-users mailing list
>> Gate-users at lists.healthgrid.org
>> http://lists.healthgrid.org/mailman/listinfo/gate-users
>>
>
>
>
> Sonal Ambwani
>
> Dept. of Electrical and Computer Engineering
> Boston University
>
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.healthgrid.org
> http://lists.healthgrid.org/mailman/listinfo/gate-users
>



Sonal Ambwani

Dept. of Electrical and Computer Engineering
Boston University