[Gate-users] a problem with CPET system

[kmitev at phys.uni-sofia.bg]

Dear all,
I am trying to make a simulation of the scanner based on CPET system. In
order  to define the CPET system, I am followng the GATE manual (version
3.0.0. from 27 July 2006). The problem is, that after the definition of
the CPET system, Gate crashes at the step:
/gate/systems/CPET/crystal/attach crystal
and gives the following error message:
---------------------------------------------
  *** Break *** segmentation violation
 Generating stack trace...
 0x081df936 in
GateBoxCreatorComponent::IsValidAttachmentRequest(GateAutoplacedCreatorInserter*)
const + 0x46 from Gate
 0x0826b040 in GateSystemComponent::SetInserter(GateVObjectInserter*) +
0x50 from Gate
 0x0830492c in GateSystemComponentMessenger::SetNewValue(G4UIcommand*,
G4String) + 0x7c from Gate
 0x088aac24 in G4UIcommand::DoIt(G4String) + 0xaa4 from Gate
 0x088b4aa7 in G4UImanager::ApplyCommand(char const*) + 0x4f7 from Gate
 0x088c1ed9 in G4UIbatch::SessionStart() + 0x199 from Gate
 0x088b3451 in G4UImanager::ExecuteMacroFile(char const*) + 0x41 from Gate
 0x088c31b6 in G4UIcontrolMessenger::SetNewValue(G4UIcommand*, G4String) +
0xe6 from Gate
 0x088aac24 in G4UIcommand::DoIt(G4String) + 0xaa4 from Gate
 0x088b4aa7 in G4UImanager::ApplyCommand(char const*) + 0x4f7 from Gate
 0x088c1ed9 in G4UIbatch::SessionStart() + 0x199 from Gate
 0x088b3451 in G4UImanager::ExecuteMacroFile(char const*) + 0x41 from Gate
 0x088c31b6 in G4UIcontrolMessenger::SetNewValue(G4UIcommand*, G4String) +
0xe6 from Gate
 0x088aac24 in G4UIcommand::DoIt(G4String) + 0xaa4 from Gate
 0x088b4aa7 in G4UImanager::ApplyCommand(char const*) + 0x4f7 from Gate
 0x084236cc in G4UIterminal::ExecuteCommand(G4String) + 0x4c from Gate
 0x08423d5a in G4UIterminal::SessionStart() + 0x5a from Gate
 0x08186403 in main + 0x353 from Gate
 0x017637e4 in __libc_start_main + 0xdc from /lib/libc.so.6
 0x08184fb1 in TApplicationImp::ShowMembers(TMemberInspector&, char*) +
0xb5 from Gate
Abort
-------------------------------------------

I am adding to this mail as an attached files the main file which controls
the simulation (k1.mac) and the file which defines the CPET system
(CPETscan.mac). I am adding as well the complete output from Gate (file:
crash.txt).

I have tried different types of parameters in the geometry and i got
always the same error. I will highly appreciate if someone can help me
with this difficulty.

Thank you very much in advance:

Krasimir Mitev, PhD
Laboratory of Dosimetry and Radiation Protection
Department of Atomic Physics
Sofia University "St. Kliment Ohridski"
Bulgaria
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: crash.txt
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20070124/e2a9ad95/attachment.txt>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: k1.mac
Type: application/octet-stream
Size: 430 bytes
Desc: not available
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20070124/e2a9ad95/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: CPETscan.mac
Type: application/octet-stream
Size: 856 bytes
Desc: not available
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20070124/e2a9ad95/attachment-0001.obj>