[gate-users] Query on OGLSX, LMF and ECAT

[Mutanga Theodore]

Hi Joao,
I only have the solution to the ECAT install problem....

> Hi Joao,
>
> If you run Gate with a file rather than in interactive mode then the
> visualization is turned off and you get an error message.
>
> To view the camera instead type
>
> "Gate"  and then use a "/control/execute <.mac file name>"
>
> And the visualization should work.  Note that if a prerunGate.mac file
> exists in the directory you are running Gate, it will be executed by
> default.
>
> See how that clears things up.  If problems persist look at the vis.mac
> file and see if you can clear it up there.
>
>

I'll have to look more at the LMF and ECAT stuff to see what's up there.
> These are optional packages and while they are quite useful, they are
> not required.
>
> Cheers,
>
> ross
>
> -----Original Message-----
> From: gate-users-bounces at lphe1pet1.epfl.ch
> [mailto:gate-users-bounces at lphe1pet1.epfl.ch] On Behalf Of Joao Seco
> Sent: Wednesday, January 26, 2005 12:13 PM
> To: gate-users at lphe1pet1.epfl.ch
> Subject: [gate-users] Query on OGLSX, LMF and ECAT
>
>
> Hi All
> I have several problems with visualization and the installation of the
>
> LMF and ECAT packages for GATE...
> Ive got RedHat 9.0 system with gcc-2.95.3 compiler...
> Ive also got GEANT4.5.2.p02 running and working properly for both
> visualization OGLIX and OGLSX outputs... ALso got ROOT installed
> and working... (downloaded ROOT from root.cern.ch version
> Intel x86 Linux for Redhat 7.3 and gcc 2.95.3, version 4.02/00)
>
> 1-However, when running benchmarkPET with the command
> Gate benchmarkPET.mac I get the following output
> ***** COMMAND NOT FOUND </vis> *****
>
> However, OGLSX works properly when running the novice GEANT4
> example N03 with the following command
> $G4WORKDIR/bin/Linux-g++/exampleN03
>
> The G4UIXm menu appears and after executing Vis1.mac I get the
> Fukui Renderer DAWN...
>
> Is there any VARIABLE I need to set in order for GATE to see OGLSX ...?
>
> 2-LMF installation problems...
> I run configure (everythng is fine)
> then make clean (no problem again)
> but after make I get the following errors
>
> /home/g4boss/root/include/TMath.h:352: parse error before `200'
> /home/g4boss/root/include/TMath.h:353: parse error before `200'
>
>
> 3-ECAT installation problems
> after tyoing make depend I get the following errors
> makedepend: warning: cannot open "./lib_compress/*.c"
>
> I checked to see if the ecat.tar.gz program had a lib_compress
> and no directory was found ....

 rename the MAKEFILE.unix file to MAKEFILE, and edit it thus, look for a
line that says something about -lsocket , the says something about //for
solaris, i don remember but I know it is a comment about solaris.
Delete the whole line , I think it is only valid for SOLARIS, unless you
are using one.

make clean and make again ECAT should now be installed!

> Should ecat have a lib_compress within...?
>
> Any help will be appreciated
> cheers
> Joao
>
>           Joao Seco, PhD
>           Physics Department
>           Royal Marsden Hospital
>           Downs Road
>           Belmont, Sutton
>           SM2 5PT
>           Surrey
>           United Kingdom
>
>           tel:  +44 (0)20 8661 3320
>           fax: +44 (0)20 8643 3812
>           email: joao at icr.ac.uk
>
> _______________________________________________
> gate-users mailing list
> gate-users at lphe1pet1.epfl.ch
> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>
>
>
> _______________________________________________
> gate-users mailing list
> gate-users at lphe1pet1.epfl.ch
> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>