[gate-users] Re: gate-users Digest, Vol 17, Issue 11

[Sebastien JAN]

Hi All,


> I had similar problem when I run the program on Fedora 4 with gcc-4.0 as 
> Dr. Wietholt mentioned in his previous mail. When running the PET bench 
> mark, the program would use up all memory before it quits itself. 


Gate is not validated for gcc 4.0 (same case for g4 7.0.p01)



> However, none of this has been observed when the package was compiled 
> using gcc 3.3 under Fedora 3. Any advise will be greatly appreciated.


Actually, gate_v2.2.0 is tested and validated for gcc 3.3 and 3.4 with 
the Fedora distribution.
I have no experience with the Debian distribution and I can't explain 
now why you have some problems with gcc 3.4
If some users have the same troubles, let me know.

Cheers
Seb

> 
> Best Regards,
> 
> Chinghan
> ----- Original Message ----- From: <gate-users-request at lphe1pet1.epfl.ch>
> To: <gate-users at lphe1pet1.epfl.ch>
> Sent: Monday, August 08, 2005 6:00 PM
> Subject: gate-users Digest, Vol 17, Issue 11
> 
> 
>> Send gate-users mailing list submissions to
>> gate-users at lphe1pet1.epfl.ch
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>>
>> Please use the GATE's site webmaster e-mail to  reach the person
>> managing the list.
>>
>>
>> Today's Topics:
>>
>>   1. gcc-3.4 compiler problems & spblurring (Christian Wietholt)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Mon, 08 Aug 2005 16:45:05 +0800
>> From: Christian Wietholt <cwietholt at nhri.org.tw>
>> Subject: [gate-users] gcc-3.4 compiler problems & spblurring
>> To: gate-users at lphe1pet1.epfl.ch
>> Message-ID: <200508081645.05987.cwietholt at nhri.org.tw>
>> Content-Type: text/plain; charset=big5
>>
>> Dear all,
>>
>> I just downloaded the latest version of GATE (2.2.0). I also got all 
>> the other
>> required software in the required versions. When compiling GATE on my 
>> Debian
>> 3.1 system using gcc-3.4 as recommended, GATE's memory usage keeps 
>> increasing
>> until all memory is used, and the program quites. So I compiled GATE with
>> gcc-3.3, and everything seems to be working fine. Am I the only person
>> experiencing this kind of problem with 2.2.0?
>>
>> I am not sure if this is connected, but when I run my pinhole 
>> simulation with
>> a point source, I would like to simulated different amount of detector 
>> blurr
>> using spblurring in the digitizer. After reading the data from the ASCII
>> file, the spatial blurring seems to only increase in the y dimension, 
>> and z
>> is uneffected. I computed the standard deviation of the globalPosY and
>> globalPosZ from gateSingles.dat, to verify. Same result, the standard
>> deviation in globalPosY is higher than for globalPosZ. The magnitude 
>> depends
>> on the amount of spatial blurring.
>>
>> I appreciate any advice I can get.
>>
>> Best Regards,
>>
>> Christian
>>
>> ------------------------------
>>
>> _______________________________________________
>> gate-users mailing list
>> gate-users at lphe1pet1.epfl.ch
>> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>>
>> End of gate-users Digest, Vol 17, Issue 11
>> ******************************************
>>
>>
> 
> 
> _______________________________________________
> gate-users mailing list
> gate-users at lphe1pet1.epfl.ch
> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
> 
>