[Gate-users] Origin of STL file not preserved

[ESLAM TAHA]

Dear  Guillaume,

I used to have the same issue. After creating STLs with SOLIDWORKS and
importing them into Gate, I noticed that it is not positioned correctly
within Gate. I solved this issue by importing the STL into Windows 3D
Builder, where you can set the origin of the model to 0,0,0. After that, if
you import the STL model in Gate, it will be positioned correctly.


Best regards,
Eslam

____________
Eng. Eslam Mohammad Taha
Medical Physics Engineer
Nuclear Engineering Department
King Abdulaziz University
Jeddah, Saudi Arabia
Email: emtaha at kau.edu.sa <ebarzangy at stu.kau.edu.sa>

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify me immediately and
delete this message from your computer system.   If you are not the
intended recipient you are notified that disclosing, copying, distributing
or taking any action in reliance on the contents of this information is
strictly prohibited.

On Tue, Nov 15, 2022 at 6:54 PM Josh Knowland <jknowland at lucernodynamics.com>
wrote:

> Hello,
>
> I use the STL import quite a lot and have never had problems. What
> software are you using to make the STL files?
> If you would like, you can send me your STL files and I can try.
>
> -josh
>
>
>
>
>
> -----Original Message-----
> From: Gate-users <gate-users-bounces at lists.opengatecollaboration.org> On
> Behalf Of Houyoux Guillaume
> Sent: Tuesday, November 15, 2022 10:52 AM
> To: gate-users at lists.opengatecollaboration.org
> Subject: [Gate-users] Origin of STL file not preserved
>
> Dear users,
>
> I would like to import the geometry of an ionization chamber from a CAD
> software to a STL file in order to define it in GATE. I have to mention
> that I need all the pieces separately to attribute a different material to
> each one of them.
> However, it seems that GATE does not remember the origine of the space
> where the chamber was first created, leading to all the pieces being
> mispositioned in GATE.
> Does anybody has an idea how to bypass this issue ? Is it really an issue
> or am I doing something wrong ?
>
> Thank you in advance for your replies,
>
> Best regards,
>
> Guillaume.
> Disclaimer : http://www.bordet.be/disclaimer/disclaimer.html
>
> L’Institut Jules Bordet a déménagé. Nouvelle adresse : 90, rue
> Meylemeersch 1070 Anderlecht Het Jules Bordet Instituut is verhuisd. Nieuw
> adres : 90, Mijlenmeersstraat 1070 Anderlecht
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users

-- 
Disclaimer: The information contained in this message is intended for the 
addressee only and may contain classified information. If you are not the 
addressee, please delete this message and notify the sender; you should not 
copy or distribute this message or disclose its contents to anyone. Any 
views or opinions expressed in this message are those of the individual(s) 
and not necessarily of the university. No reliance may be placed on this 
message without written confirmation from an authorized representative of 
its contents. No guarantee is implied that this message or any attachment 
is virus free or has not been intercepted and amended. 


إخلاء مسؤليه:  ان 
جميع المعلومات المتضمنة في هذه الرسالة تخص المستلم، وربما تتضمن معلومات 
سرية، واذا لم تكن انت المستلم فالرجاء الغاء الرسالة واشعار المرسل، كما يمنع 
نسخ او توزيع هذه الرسالة او افشاء محتوياتها لاخرين. ويجدر بالعلم ان جميع 
الآراء ووجهات النظر الواردة في هذه الرسالة تعتبر شخصية وليست بالضرورة 
منسوبة للجامعة. كما لايمكن ان يعتمد على هذه الرسالة ما لم تحصل على موافقة 
خطية من المسئول عن محتوياتها. كما لايوجد ضمان بان هذه الرسالة أو مرفقاتها 
خالية من الفيروسات أو انها لم يتم اعتراضها وتعديلها


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20221115/49d697df/attachment-0001.html>