[Gate-users] Need visualization of the geometry

[viraj sawant]

Thanks, I'll check it out.

On Tue, Nov 10, 2020 at 3:00 AM Francisco Enríquez <frank.enrqz at gmail.com>
wrote:

> Hi Viraj,
>
>
>
> I’m assuming that if you *type /vis/open OGL* you don’t get any error
> (i.e. That you install GATE with a visualization tool).  If that’s the
> case, have you tried adding this line: */vis/drawVolume*?
>
> Additionally, nothing is going to be displayed in GATE until you
> initialise your simulation - /*gate/run/initialize *
>
>
>
> I hope these basic steps could help you.
>
>
>
> Cheers,
>
> Francisco
>
>
>
>
>
> *From: *Gate-users <gate-users-bounces at lists.opengatecollaboration.org>
> on behalf of viraj sawant <virajsawant121 at gmail.com>
> *Date: *Tuesday, 10 November 2020 at 2:03 am
> *To: *"gate-users at lists.opengatecollaboration.org" <
> gate-users at lists.opengatecollaboration.org>
> *Subject: *Re: [Gate-users] Need visualization of the geometry
>
>
>
> Can any one help me for this
>
>
>
> On Sat, 7 Nov, 2020, 3:54 pm viraj sawant, <virajsawant121 at gmail.com>
> wrote:
>
> Dear Gate user below in the geometry which is define for PET scanner.i
> want to visualize it can you help how i can do that  I have tried with the
> /vis/open OGL command but nothing is shows in the viewer kindly provide the
> sequence of the commands so that i can able to visualize the above geometry
> in the viewer.
>
> #
>
>
>
> #     W O R L D
> #
> /gate/geometry/setMaterialDatabase    GateMaterials.db
>
>
> /gate/world/geometry/setXLength       400. cm
> /gate/world/geometry/setYLength       400. cm
> /gate/world/geometry/setZLength       400. cm
>
>
>
>
>
> /gate/world/daughters/name                    ecat
> /gate/world/daughters/insert             cylinder
> /gate/ecat/placement/setTranslation           0.0 0.0 0.0 cm
> /gate/ecat/geometry/setRmax                   50 cm
> /gate/ecat/geometry/setRmin                   43 cm
> /gate/ecat/geometry/setHeight                 25 cm
> # TASK
> # CHOOSE A MATERIAL
> #
> /gate/ecat/setMaterial                        Air
> /gate/ecat/vis/forceWireframe
> /gate/ecat/vis/setColor                       red
>
> # BLOCK
> /gate/ecat/daughters/name                     blockDetector
> /gate/ecat/daughters/insert                   box
> /gate/blockDetector/placement/setTranslation  46 0 0 cm
> /gate/blockDetector/geometry/setXLength       2 cm
> /gate/blockDetector/geometry/setYLength       5.35 cm # 12*4mm for crystal
> + 11*0.5 for gaps
> /gate/blockDetector/geometry/setZLength       5.35 cm
>
> /gate/blockDetector/setMaterial               Air
> /gate/ecat/vis/forceWireframe
> /gate/blockDetector/vis/setColor              green
>
>
>
> # C R Y S T A L
> /gate/blockDetector/daughters/name             crystalUnit
> /gate/blockDetector/daughters/insert           box
> /gate/crystalUnit/placement/setTranslation     0.0 0.0 0.0 mm
> /gate/crystalUnit/geometry/setXLength          20. mm
> /gate/crystalUnit/geometry/setYLength          4. mm
> /gate/crystalUnit/geometry/setZLength          4. mm
>
> /gate/crystalUnit/setMaterial                  LSO
> /gate/crystalUnit/vis/setColor                 yellow
> /gate/crystalUnit/vis/setVisible              0
>
>
>
> /gate/blockDetector/repeaters/insert                  ring
> /gate/blockDetector/ring/setRepeatNumber              46
>
> /gate/blockDetector/repeaters/insert                  linear
> /gate/blockDetector/linear/setRepeatNumber            4
> /gate/blockDetector/linear/setRepeatVector            0.0 0.0 55 mm
>
> /gate/crystalUnit/repeaters/insert                    cubicArray
> /gate/crystalUnit/cubicArray/setRepeatNumberX         1
> /gate/crystalUnit/cubicArray/setRepeatNumberY         12
> /gate/crystalUnit/cubicArray/setRepeatNumberZ         12
> /gate/crystalUnit/cubicArray/setRepeatVector          0.0 4.5 4.5 mm
>
>
>
> #
> /gate/systems/ecat/block/attach     blockDetector
> /gate/systems/ecat/crystal/attach   crystalUnit
>
>
> /gate/crystalUnit/attachCrystalSD
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20201110/a29cf8a5/attachment.html>