[Gate-users] FWHM without feeding during SPECT simulating

[Khalid Hussain]

Dear gate users,

I need your kind cooperation in a problem that I asked about three days ago
but none has answered.

I am calculating energy resolution (FWHM), to validate the gamma camera.
The way I am preceding is, I used digitizer module and saved it's output in
ASCII format, from single.dat ASCII file,I extracted energy deposited and
calculated FWHM (energy resolution), this value of energy resolution is
same which I set in script as ;

/gate/digitizer/Singles/blurring/setResolution 0.10

My question is how can we calculate energy resolution without pre-setting
it's value in script (as above) to validate the camera.

I hope someone will guide me
Thank you

On Sat, Jun 20, 2020, 2:56 PM Khalid Hussain <khalidhussain1134 at gmail.com>
wrote:

> Dear Gate users,
>
> Please have a look on my problem and guide me.
> Thank you very much.
>
> On Fri, Jun 19, 2020, 5:23 PM Khalid Hussain <khalidhussain1134 at gmail.com>
> wrote:
>
>> Dear Users,
>>
>> From the following line we feed the value of FWHM to the simulation.
>>
>> /gate/digitizer/Singles/blurring/setResolution 0.10
>>
>>
>> Whatever I set the value, I get almost same after plotting endep in
>> single.dat.
>>
>> I want to calculate the FWHM rather than feeding its value to the
>> simulation
>>
>> I have to validate the camera so I need to calculate myself, please guide.
>>
>> Thank you
>>
>>
>> Regards
>> Khalid Hussain
>> PhD Student, UPM
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20200622/b0f65b51/attachment.html>