[Gate-users] STL file for detector

[Svetlana Shasharina]

So I can use STL for any geometry.  Thank you, Matthew!

Svetlana

On 8/8/19 5:09 PM, Matthew Strugari wrote:
> Hi Svetlana,
>
> Take a look at the section How to build a "tessellated" volume on the 
> wiki page 
> http://wiki.opengatecollaboration.org/index.php/Users_Guide:Defining_a_geometry. 
> The sample code is from the GateContrib GitHub repository as outlined 
> on the wiki.
>
> Cheers,
> Matthew
>
> --
> Matthew Strugari
> Biomedical Translational Imaging Centre - BIOTIC,
> 5890 University Ave,
> Halifax, NS, B3K 6R8
>
>
> On Aug 8, 2019, at 6:28 PM, Svetlana G. Shasharina <sveta at txcorp.com 
> <mailto:sveta at txcorp.com>> wrote:
>
>> Hello,
>>
>> Is there a way to use an STL file for the detector geometry?
>>
>> Thank you,
>>
>> Sveta
>>
>> -- 
>> Svetlana Shasharina                            | sveta at txcorp.com 
>> <mailto:sveta at txcorp.com>
>> Vice-President of Computational Infrastructure | Tech-X Corporation
>>
>> _______________________________________________
>> Gate-users mailing list
>> Gate-users at lists.opengatecollaboration.org 
>> <mailto:Gate-users at lists.opengatecollaboration.org>
>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20190808/23e0eca2/attachment.html>