[Gate-users] Gate-users Digest, Vol 147, Issue 16

Mariele Stockhoff Mariele.Stockhoff at UGent.be
Wed Aug 29 08:28:49 CEST 2018


Hi Kevin and Katrin,

Do you want to share your Materials/Surfaces.xml and point out the problems with it? Which model are you using? Someone on the mailing list might have had similar problems.
In case you are using the UNIFIED model, there is no general convention of how to set the parameters (Surfaces.xml) properly. Different parameter settings work well for different   set-ups (scintillator geometries etc.) when compared to experimental data. If you want to reproduce the results of the paper try contacting the author to ask for the specific surface settings?
Feel free to contact me as well, I will try to help you with your questions!

Best wishes,
Mariele Stockhoff
--
UGent
Medical Imaging and Signal Processing (MEDISIP)
IBiTech - Campus UZ - Entrance 36 (Block B)
Corneel Heymanslaan 10
B-9000 Gent
Belgium




On 28 Aug 2018, at 12:00, gate-users-request at lists.opengatecollaboration.org<mailto:gate-users-request at lists.opengatecollaboration.org> wrote:

Send Gate-users mailing list submissions to
gate-users at lists.opengatecollaboration.org<mailto:gate-users at lists.opengatecollaboration.org>

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
or, via email, send a message with subject or body 'help' to
gate-users-request at lists.opengatecollaboration.org

You can reach the person managing the list at
gate-users-owner at lists.opengatecollaboration.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Gate-users digest..."


Today's Topics:

  1. Re: Seeking Experienced Optical Tracking Users for Help and
     Advice (Katrin Schnürle)


----------------------------------------------------------------------

Message: 1
Date: Tue, 28 Aug 2018 09:33:29 +0200
From: Katrin Schnürle <katrin at schnuerle.org>
To: gate-users at lists.opengatecollaboration.org
Subject: Re: [Gate-users] Seeking Experienced Optical Tracking Users
for Help and Advice
Message-ID: <67ff2b0d-a3bd-8101-7ec5-1d836cf56366 at schnuerle.org>
Content-Type: text/plain; charset="utf-8"; Format="flowed"

Hello,

I would be interested in following the conversation as well, as I also
encountered problems with optical tracking in GATE and I tried lots of
things and dug deep into the different documentations.

All the best,
Katrin


On 27/08/2018 19:49, Kevin Wilson wrote:
Hello all.
I am a somewhat experienced Gate user, but I am running into a deadend
with an optical tracking simulation I am performing and need some help.
I am trying to recreate a published experiment and their results using
Gate V7.2, but I am not able to do so. Without being able to reproduce
the published results I am unable to move forward with my own research
with is keeping me from completing my degree program. I believe that
my problem lies within my Surfaces.xml or Materials.xml files, but it
could also lie in my surface definitions or my output settings.
Whatever it is, I'm unable to figure it out on my own. If anyone out
there would be willing to look over my code and supplement files to
see where my mistake may be I would very greatly appreciate it.
Thank you to all who respond to this email, and good luck to all
others. When ever the problem is resolved I will make sure to post my
solutions to the group in case anyone else may benefit from them. I
wish you all the best, and look forward to hearing from some of you soon.

Sincere regards,

--
*R. Kevin Wilson*

San Diego State University | /2018/
Department of Physics | /M.S. Medical Physics/
Radiation Detection Measurement & Modeling Laboratory
/PET/SPECT Modeling - GEANT4; GATE/



Clemson University | /2015/
College of Engineering & Science
Department of Physics & Astronomy | /B.S. Applied Physics/
CU EBIT & Atomic Physics Laboratory *|* /Intern Recipient and Student
Researcher/

/
/
rkwilso at g.clemson.edu <mailto:rkwilso at g.clemson.edu>
rkwils <mailto:rkwilson at mail.sdsu.edu>o.clemtech15 at gmail.com
<mailto:o.clemtech15 at gmail.com>
(828) 216-5310


_______________________________________________
Gate-users mailing list
Gate-users at lists.opengatecollaboration.org
http://lists.opengatecollaboration.org/mailman/listinfo/gate-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20180828/fcba3e2e/attachment-0001.html>

------------------------------

Subject: Digest Footer

_______________________________________________
Gate-users mailing list
Gate-users at lists.opengatecollaboration.org
http://lists.opengatecollaboration.org/mailman/listinfo/gate-users

------------------------------

End of Gate-users Digest, Vol 147, Issue 16
*******************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20180829/a9c70ae1/attachment.html>


More information about the Gate-users mailing list