[Gate-users] Different results from same phantom

[P. T.]

Dear Gater,

I simulated a simple point source and detector in opposite side of a
cylinder as Phantom in vGATE72.

I defined two geometry for the Phantom.

First simulation were done with Geo.1 for the Phantom.
####################### Geo.1
/gate/world/daughters/name Phantom
/gate/world/daughters/insert cylinder
/gate/Phantom/geometry/setRmax 3 cm
/gate/Phantom/geometry/setRmin 0. cm
/gate/Phantom/geometry/setHeight 1 cm
/gate/Phantom/placement/setTranslation  0. 3. 0. cm
/gate/Phantom/setMaterial Plexiglass

###################################

The second simulation was done with Geo.2 for the Phantom.

######Geo.2

/gate/world/daughters/name Phantom
/gate/world/daughters/insert cylinder
/gate/Phantom/geometry/setRmax 9.75  cm
/gate/Phantom/geometry/setRmin 0. cm
/gate/Phantom/geometry/setHeight 2 cm
/gate/Phantom/placement/setTranslation 0. 0. 0. cm
/gate/Phantom/setMaterial Vacuum


/gate/Phantom/daughters/name cylinder2
/gate/Phantom/daughters/insert cylinder
/gate/cylinder2/geometry/setRmax 3 cm
/gate/cylinder2/geometry/setRmin 0. cm
/gate/cylinder2/geometry/setHeight 1 cm
/gate/cylinder2/placement/setTranslation  0. 3. 0. cm
/gate/cylinder2/setMaterial Plexiglass
###################################################

Two geometries are not different, but the energy spectrum is different in
root output.
 Is it a bug in GATE?

Regards,
P
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20171001/2b38c1d4/attachment.html>