[Gate-users] Warning : Geant4 kernel

[P. T.]

Dear All,

I  compile and install Gate 8 with G4.10.03.p01 without  ITK  and LMF.
Everything is OK and I have output from my simulations.  But, when I
run any example such as BenchSPECT or other simulations, I have some
warning before starting a simulation, as following:
[Core-0] Initialization of actors
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.



Terminal commands for running the benchSPECT.mac:


[Acquisition-0] Slice 1 from 37.5 to 75 s [slice=37.5 s]
 clearing up the projection data matrices ... done
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.
[Acquisition-0] Slice 2 from 75 to 112.5 s [slice=37.5 s]
 clearing up the projection data matrices ... done
Current application state is Idle
Warning : Geant4 kernel is not Init state : Assuming Init state.



Is this important?

Thanks.

Regard,
P