[Gate-users] how to get the XCAT output into GATE.

[Varsha Viswanath]

Someone can tell me if there's a more effective method, but this is what I
prefer.

I will load the bin file into matlab and save it as an analyze image using
this toolbox (
https://www.mathworks.com/matlabcentral/fileexchange/8797-tools-for-nifti-and-analyze-image
).

I will then read it into GATE as described
http://wiki.opengatecollaboration.org/index.php/Users_Guide_V7.2:Voxelized_Source_and_Phantom#Description_of_voxelized_phantoms

If you don't have matlab, you should be able to do something similar using
ImageJ

--Varsha

On Fri, Jun 23, 2017 at 3:55 AM, 李晓楠 <506567442 at qq.com> wrote:

> My research is about GATE simulation for  heart SPECT scanner .I have
> installed the Gate V_7.2,now ,I want to know how to get the XCAT output
> into GATE. ,can anybody help me solve this problem?
>
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>



-- 
Varsha Viswanath
HHMI-NIBIB Interfaces Scholar, PhD Student
Department of Bioengineering
University of Pennsylvania
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/pipermail/gate-users/attachments/20170623/1c353dd1/attachment.html>