[Gate-users] (no subject)

[Andrej Studen]

As for overlap, geant4 tools might help:

http://geant4.web.cern.ch/geant4/G4UsersDocuments/UsersGuides/ForApplicationDeveloper/html/Detector/geomOverlap.html

As for viewing geometry, try to enter commands from the macro one by one 
in the interactive mode. If adding volumes shows no change in the 
viewer, try doing
/gate/geometry/rebuild, which reinitializes the geometry defined so far.

Andrej


On 05/21/15 15:23, MauroNappa at libero.it wrote:
> Dear all
> I have a problem in setting visualization.
> I would like to know how to check a geometry in terms of checking for 
> overlapping geometries and viewing a geometry for several seconds on 
> the screen before that disappears. Can anyone help me please?
> Thank you very much
> Kind Regards
> Mauro
>
>
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users


-- 
****************************************
dr. Andrej Studen
Jozef Stefan Institute,
Jamova 39, 1000 Ljubljana, Slovenia
Tel.: +386 1 477 3162
       +386 31 822 779 (mobile)	
Fax.: +386 1 477 3166
*****************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20150521/26d2e5d0/attachment.html>