[Gate-users] parallelepiped source

[Ahmed Elmekawy]

Hi Nada and Hojjat,

Finally,it is worked with me

/gate/source/addSource F18CylinderSource
/gate/source/F18CylinderSource/setActivity 100000. becquerel
/gate/source/F18CylinderSource/gps/particle e+
/gate/source/F18CylinderSource/setForcedUnstableFlag true
/gate/source/F18CylinderSource/setForcedHalfLife 6586 s
/gate/source/F18CylinderSource/gps/energytype Fluor18
/gate/source/F18CylinderSource/gps/type Volume
/gate/source/F18CylinderSource/gps/shape Para
/gate/source/F18CylinderSource/gps/halfx 10 cm
/gate/source/F18CylinderSource/gps/halfy 10 cm
/gate/source/F18CylinderSource/gps/halfz 5 cm
/gate/source/F18CylinderSource/gps/paralp 90.0 deg
/gate/source/F18CylinderSource/gps/parthe 90.0 deg
#/gate/source/F18CylinderSource/gps/parphi 0. deg

/gate/source/F18CylinderSource/gps/angtype iso
/gate/source/F18CylinderSource/gps/centre 0.0 0.0 0. cm


Thanks so much for your help.


Best Regards,
Ahmed

On Mon, Feb 23, 2015 at 3:14 PM, Nada Fakhoury <nfachour at physics.auth.gr>
wrote:

> Dear Ahmed,
>
> could you send us the error log you get when trying to run your simulation?
>
> This might help understand what the problem is.
>
>
> Nada
>
>
>
>> Message: 3
>> Date: Mon, 23 Feb 2015 00:30:04 +0100
>> From: Ahmed Elmekawy <ahmedfelmekawy at gmail.com>
>> To: Hojjat Mahani <hojjat.mahani at gmail.com>
>> Cc: GATErs <gate-users at lists.opengatecollaboration.org>
>> Subject: Re: [Gate-users] parallelepiped source (Ahmed Elmekawy)
>> Message-ID:
>>         <CAHVDdX_qVTZ-UTrYnor-3pZ5OfHdY8pn-eNFQU0JWbtLLZNXMg at mail.gmail.
>> com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Dear Hojjat,
>>
>> Thanks a lot, I tried to do that before and it is not working but I guess
>> the parallelepiped source is not implemented yet to the Gate (Page 25), I
>> found that in the user guide but for the Phantom, I am not sure if that
>> also for the source.
>>
>> Best Regards,
>> Ahmed
>>
>> On Sat, Feb 21, 2015 at 1:29 PM, Hojjat Mahani <hojjat.mahani at gmail.com>
>> wrote:
>>
>>  Dear Ahmed,
>>>
>>> In addition to the Nada's comment, try the following (instead what you
>>> had
>>> entered):
>>>
>>> /gate/source/F18CylinderSource/gps/shape Para
>>>
>>> /gate/source/F18CylinderSource/gps/paralp  90. deg
>>> /gate/source/F18CylinderSource/gps/parthe  90. deg
>>> /gate/source/F18CylinderSource/gps/parphi   90. deg
>>>
>>> Side note: Be sure that the "90 degrees" angles are reasonable as well.
>>>
>>> Hope this help!
>>>
>>> Hojjat
>>>
>>> _______________________________________________
>>> Gate-users mailing list
>>> Gate-users at lists.opengatecollaboration.org
>>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>>>
>>>  -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/
>> attachments/20150223/e9332e1f/attachment-0001.html>
>>
>> ------------------------------
>>
>> _______________________________________________
>> Gate-users mailing list
>> Gate-users at lists.opengatecollaboration.org
>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>>
>> End of Gate-users Digest, Vol 105, Issue 26
>> *******************************************
>>
>
>
>
>
>
>
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20150223/cf67bf56/attachment.html>