[Gate-users] Sinogram from Root file

[Marc Chamberland]

Hi Ana,

Sorta. A couple of people have written tools over the years to convert the Root output to projection data readable by STIR (for image reconstruction) and STIR provides a utility to extract sinograms from the projection data.

This program generates projection data readable by STIR: http://sourceforge.net/projects/gatepet2stir/
You can get STIR from here: http://stir.sourceforge.net

The utility extract_segments from STIR allows you to extract the sinograms (in Interfile format, so you’ll to use Amide or a similar to program to display them).

Cheers,
Marc



__________________________

Marc Chamberland, MSc
PhD candidate
Department of Physics
Carleton University
Ottawa (ON)

On Nov 26, 2014, at 12:35, Ana Margarida Mota <ninimota87 at gmail.com<mailto:ninimota87 at gmail.com>> wrote:

Dear Gate users,

I would like to know if there is any way to have a sinogram from the root file??

I know we can have directly the sinogram as output, but that's not the question.
My simulation is still running and I it would be good to analyze the sinogram from data obtained so far.

Thanks in advance!!

Regards,
Ana Margarida
_______________________________________________
Gate-users mailing list
Gate-users at lists.opengatecollaboration.org<mailto:Gate-users at lists.opengatecollaboration.org>
http://lists.opengatecollaboration.org/mailman/listinfo/gate-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20141126/d1421219/attachment.html>