[Gate-users] Spot scanning using Pencil beam

[Loic Grevillot]

I do not understand exactly your issues, but what I know is that if you run
one simulation for one spot, you have the dose for this spot.
I you do so for each spot, you will have a different output for each spot,
which is I think answer your first questions.
You can then sum-up all doses for all spots together if you like.
If you wish to obtain directly one output per spot in a single simulation,
you have to modify the source code I guess.

Hope this help,

Loïc


Loïc


2013/5/7 Joulaeizadeh, (L) , Mrs <LJoulaeizadeh at vsl.nl>

> Hi Loic,****
>
> I need to run the simulation of all the spots once since I need to use
> different output files of one simulation to later calculate the heat
> transport by time in a water phantom.****
>
> Any other idea to solve the problem?****
>
> Leila****
>
> ** **
>
> <http://www.hollandmetrology.nl>
>
>
>
>   <http://www.vsl.nl/> <http://www.vsl.nl>
>
>  VSL
>
>  Mrs (L) Joulaeizadeh PhD
>
>  Research Scientist - Ionizing Radiation Standards
>
>  D +31 15 2691681
>
>  T +31 15 2691500
>
>
>
>  www.vsl.nl
>
>
>
>  DISCLAIMER <http://www.vsl.nl/disclaimer>
>
>
>
>
>
> *From:* Loic Grevillot [mailto:loic.grevillot at gmail.com]
> *Sent:* dinsdag 7 mei 2013 11:51
> *To:* Joulaeizadeh, (L) , Mrs
> *Cc:* gate-users at lists.opengatecollaboration.org
> *Subject:* Re: [Gate-users] Spot scanning using Pencil beam****
>
> ** **
>
> You may try to run one simulation for the first spot and another for the
> second spot, or to separate them per field, using this command:****
>
> #/gate/source/PBS/setNotAllowedFieldID 1****
>
>
> ****
>
> Loïc****
>
> ** **
>
> 2013/5/7 Joulaeizadeh, (L) , Mrs <LJoulaeizadeh at vsl.nl>****
>
> Dear Gate-Users,****
>
> I would like to scan two separate spots using a proton pencil beam. I
> would like to scan the first spot, write the dose in a first output file
> (can be root file), then scan the second spot and write the dose in the
> second output file.****
>
>  ****
>
> The problem is that one dose file is not specified to one spot and in
> every dose file I see the information of two spots.****
>
>  ****
>
> Does anyone know how can I have separate output per separate spot?****
>
>  ****
>
> My planning file and main macro are attached to this email in case you
> would like to have a look.****
>
>  ****
>
> Any help would be appreciated.****
>
>  ****
>
> Leila****
>
>  ****
>
> **** <http://www.vsl.nl>
>
>  VSL**** <http://www.vsl.nl>
>
>  Mrs (L) Joulaeizadeh PhD**** <http://www.vsl.nl>
>
>  Research Scientist - Ionizing Radiation Standards**** <http://www.vsl.nl>
>
>  D *+31 15 2691681***** <http://www.vsl.nl>
>
>  T +31 15 2691500 **** <http://www.vsl.nl>
>
>  **** <http://www.vsl.nl>
>
>  *www.vsl.nl***** <http://www.vsl.nl>
>
>  **** <http://www.vsl.nl>
>
>  *DISCLAIMER***** <http://www.vsl.nl>
>
>  **** <http://www.vsl.nl>
>
>  **** <http://www.vsl.nl>
>
> ** ** <http://www.vsl.nl>
>
>
> _______________________________________________
> Gate-users mailing list
> *Gate-users at lists.opengatecollaboration.org*
> *http://lists.opengatecollaboration.org/mailman/listinfo/gate-users*****<http://www.vsl.nl>
>
> ** ** <http://www.vsl.nl>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20130507/6da32fc1/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: vsl_logo_rgba7fad.jpg
Type: image/jpeg
Size: 7948 bytes
Desc: not available
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20130507/6da32fc1/attachment-0001.jpg>