[Gate-users] Volume ID convention

[Marc Chamberland]

Hi Tuoyu!

Usually, the indexing increases first along the x-axis, then along the y-axis, and finally along the z-axis.

In the case of the ring repeater, the indexing increases in the counter-clockwise direction around the ring axis.

See the figures I've attached.

I hope this helps!
Marc



__________________________

Marc Chamberland, MSc
PhD candidate
Department of Physics
Carleton University
Ottawa (ON)

Le 2012-08-28 à 2:04 PM, Cao Tuoyu <tuoyucao at bnl.gov<mailto:tuoyucao at bnl.gov>>
 a écrit :

Hi,

I saw people asked this question but there is not response. In the output file of gate there are many "ID" (volume ID, source ID etc). So what is the convention of volume ID? Thanks a lot.

Regards
Tuoyu

---
Tuoyu Cao
Doctoral Student, Department of Biomedical Engineering, Stony Brook University
Research Assistant, Medical Department, Brookhaven National Laboratory

Building 510
Brookhaven National Laboratory
Upton, NY 11973
tuoyucao at bnl.gov<mailto:tuoyucao at bnl.gov>

_______________________________________________
Gate-users mailing list
Gate-users at lists.opengatecollaboration.org
http://lists.opengatecollaboration.org/mailman/listinfo/gate-users

-------------- next part --------------
A non-text attachment was scrubbed...
Name: cubicRepeaterIndexing.pdf
Type: application/pdf
Size: 61808 bytes
Desc: cubicRepeaterIndexing.pdf
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20120828/7cf0d4c5/attachment-0002.pdf>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ringRepeaterIndexing.pdf
Type: application/pdf
Size: 53303 bytes
Desc: ringRepeaterIndexing.pdf
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20120828/7cf0d4c5/attachment-0003.pdf>