[Gate-users] Gate-users Digest, Vol 71, Issue 19

Marc Chamberland mchamber at connect.carleton.ca
Fri Apr 20 15:38:33 CEST 2012 

Hi!

You don't need to worry about these flags, unless you have trouble running Gate. 

Just try to run Gate. If it works, then never worry about these flags again.

Marc



__________________________


Marc Chamberland, MSc
PhD candidate
Department of Physics
Carleton University
Ottawa (ON)

Le 2012-04-20 à 9:35 AM, ???? a écrit :

> hi friends
>   I can't understand  that these  output  FLAGS(  XERCESCROOT,XMFLAGS,XAWFLAGS) had not been set to any value ,such as "XAWFLAGS=  null value". Is my configuration of geant4 wrong ? What do these  mean by the output :"On this machine the XMLIBS= -lXm -lXpm".
> 
> Best regards
> 
> 
> 
> 
> 
> 
> 
> 
> ----- Original Message ----- 
> From: <gate-users-request at lists.opengatecollaboration.org>
> To: <gate-users at lists.opengatecollaboration.org>
> Sent: Friday, April 20, 2012 6:00 PM
> Subject: Gate-users Digest, Vol 71, Issue 19
> 
> 
>> Send Gate-users mailing list submissions to
>> gate-users at lists.opengatecollaboration.org
>> 
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>> or, via email, send a message with subject or body 'help' to
>> gate-users-request at lists.opengatecollaboration.org
>> 
>> You can reach the person managing the list at
>> gate-users-owner at lists.opengatecollaboration.org
>> 
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of Gate-users digest..."
>> 
>> 
>> Today's Topics:
>> 
>>  1. Re: the output content of Launching Geant4 configuration
>>     script (Hermann Fuchs)
>>  2. (sans objet) (abdel aziz)
>>  3. Re: (sans objet) (Hermann Fuchs)
>> 
>> 
>> ----------------------------------------------------------------------
>> 
>> Message: 1
>> Date: Thu, 19 Apr 2012 13:31:20 +0200
>> From: Hermann Fuchs <hermann.fuchs at meduniwien.ac.at>
>> To: gate-users at lists.opengatecollaboration.org
>> Subject: Re: [Gate-users] the output content of Launching Geant4
>> configuration script
>> Message-ID:
>> <1334835080.7701.18.camel at strahlen41.strahlen.meduniwien.ac.at>
>> Content-Type: text/plain; charset="UTF-8"
>> 
>> Hi
>> 
>> Could you describe your problem?
>> The output does not look that bad...
>> 
>> Best regards,
>> Hermann
>> On Thu, 2012-04-19 at 11:10 +0800, dabin wrote:
>>> hi friends!
>>> 
>>>        I type the the command in terminal  :source  
>>> /home/liubin/simulation/gate6_1/env_gate.sh. I am not sure that  the 
>>> output  result is right ,such as
>>> "On this machine the XERCESCROOT=",
>>> "On this machine the XMFLAGS="
>>> "On this machine the XMLIBS= -lXm -lXpm "
>>> "On this machine the XMFLAGS="
>>> "On this machine the XAWFLAGS="
>>> "On this machine the XAWLIBS= -lXaw"
>>> 
>>> These  were output  :
>>> 
>>> The current value of G4INSTALL is: /home/liubin/simulation/geant4_9_4_p03
>>> The current value of G4VERSION is: 9.4
>>> 
>>> Launching Geant4 configuration script 
>>> /home/liubin/simulation/geant4_9_4_p03/env.sh
>>> 
>>> On this machine the G4SYSTEM=Linux-g++
>>> On this machine the G4INSTALL=/home/liubin/simulation/geant4_9_4_p03
>>> On this machine the 
>>> G4INCLUDE=/home/liubin/simulation/geant4_9_4_p03/include/
>>> On this machine the G4LIB=/home/liubin/simulation/geant4_9_4_p03/lib
>>> On this machine the 
>>> G4LEVELGAMMADATA=/home/liubin/simulation/geant4_9_4_p03/data/PhotonEvaporation2.1
>>> On this machine the 
>>> G4RADIOACTIVEDATA=/home/liubin/simulation/geant4_9_4_p03/data/RadioactiveDecay3.3
>>> On this machine the 
>>> G4LEDATA=/home/liubin/simulation/geant4_9_4_p03/data/G4EMLOW6.19
>>> On this machine the 
>>> G4NEUTRONHPDATA=/home/liubin/simulation/geant4_9_4_p03/data/G4NDL3.14
>>> On this machine the 
>>> G4ABLADATA=/home/liubin/simulation/geant4_9_4_p03/data/G4ABLA3.0
>>> On this machine the 
>>> G4REALSURFACEDATA=/home/liubin/simulation/geant4_9_4_p03/data/RealSurface1.0
>>> On this machine the 
>>> G4NEUTRONXSDATA=/home/liubin/simulation/geant4_9_4_p03/data/G4NEUTRONXS1.0
>>> On this machine the 
>>> G4PIIDATA=/home/liubin/simulation/geant4_9_4_p03/data/G4PII1.2
>>> On this machine the CLHEP_BASE_DIR=/home/liubin/simulation/CLHEP_2_1_0_1
>>> On this machine the 
>>> CLHEP_INCLUDE_DIR=/home/liubin/simulation/CLHEP_2_1_0_1/include
>>> On this machine the CLHEP_LIB_DIR=/home/liubin/simulation/CLHEP_2_1_0_1/lib
>>> On this machine the CLHEP_LIB=CLHEP
>>> On this machine the G4UI_USE_TCSH=1
>>> On this machine the G4UI_BUILD_XAW_SESSION=1
>>> On this machine the G4UI_USE_XAW=1
>>> On this machine the G4UI_BUILD_XM_SESSION=1
>>> On this machine the G4UI_USE_XM=1
>>> On this machine the G4UI_BUILD_QT_SESSION=1
>>> On this machine the G4UI_USE_QT=1
>>> On this machine the G4VIS_BUILD_DAWN_DRIVER=1
>>> On this machine the G4VIS_BUILD_OPENGLX_DRIVER=1
>>> On this machine the G4VIS_BUILD_OPENGLXM_DRIVER=1
>>> On this machine the G4VIS_BUILD_RAYTRACERX_DRIVER=1
>>> On this machine the G4VIS_BUILD_VRML_DRIVER=1
>>> On this machine the G4VIS_BUILD_OPENGLQT_DRIVER=1
>>> On this machine the G4VIS_USE_DAWN=1
>>> On this machine the G4VIS_USE_OPENGLX=1
>>> On this machine the G4VIS_USE_OPENGLXM=1
>>> On this machine the G4VIS_USE_RAYTRACERX=1
>>> On this machine the G4VIS_USE_VRML=1
>>> On this machine the G4VIS_USE_OPENGLQT=1
>>> On this machine the XMFLAGS=
>>> On this machine the XMLIBS= -lXm -lXpm
>>> On this machine the XMFLAGS=
>>> On this machine the XAWFLAGS=
>>> On this machine the XAWLIBS= -lXaw
>>> On this machine the QTMOC=/usr/include/qt4/bin/moc
>>> On this machine the QTFLAGS=-I/usr/include/qt4/include 
>>> -I/usr/include/qt4/include/QtCore -I/usr/include/qt4/include/QtGui  
>>> -I/usr/include/qt4/include/QtOpenGL
>>> On this machine the QTLIBS=-L/usr/include/qt4/lib -lQtCore -lQtGui
>>> On this machine the GLQTLIBS=-L/usr/include/qt4/lib -lQtCore -lQtGui 
>>> -lQtOpenGL
>>> On this machine the G4LIB_BUILD_GDML=1
>>> On this machine the XERCESCROOT=
>>> On this machine the G4LIB_BUILD_G3TOG4=1
>>> On this machine the G4LIB_USE_G3TOG4=1
>>> On this machine the G4LIB_BUILD_ZLIB=1
>>> On this machine the G4LIB_USE_ZLIB=1
>>> On this machine the G4LIB_BUILD_SHARED=1
>>> On this machine the G4LIB_BUILD_STATIC=1
>>> 
>>> Best regards
>>> 
>>> _______________________________________________
>>> Gate-users mailing list
>>> Gate-users at lists.opengatecollaboration.org
>>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>> 
>> -- 
>> -------------
>> DI Hermann Fuchs
>> Christian Doppler Laboratory for Medical Radiation Research for Radiation Oncology
>> Department of Radiation Oncology
>> Medical University Vienna
>> W?hringer G?rtel 18-20
>> A-1090 Wien
>> 
>> Tel.  + 43 / 1 / 40 400 7271
>> Mail. hermann.fuchs at meduniwien.ac.at
>> 
>> 
>> 
>> ------------------------------
>> 
>> Message: 2
>> Date: Thu, 19 Apr 2012 18:49:11 +0000
>> From: abdel aziz <abdelzz at hotmail.com>
>> To: <gate-users at lists.opengatecollaboration.org>
>> Subject: [Gate-users] (sans objet)
>> Message-ID: <DUB104-W479A9C8BCD05EEB27674BFA13D0 at phx.gbl>
>> Content-Type: text/plain; charset="iso-8859-1"
>> 
>> 
>> 
>> Dear all,I am a beginner student, I use GATE to simulate high energy electrons in a homogeneousmedium, please help me by showing me the steps to follow in this topic.
>> 
>> thank you all.      
>> 
>> ------------------------------
>> 
>> Message: 3
>> Date: Thu, 19 Apr 2012 21:13:26 +0200
>> From: Hermann Fuchs <hermann.fuchs at meduniwien.ac.at>
>> To: gate-users at lists.opengatecollaboration.org
>> Subject: Re: [Gate-users] (sans objet)
>> Message-ID: <4F9063D6.8020606 at meduniwien.ac.at>
>> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>> 
>> Hi
>> 
>> Please have a look at the getting started guide.
>> http://wiki.opengatecollaboration.org/index.php/Users_Guide_V6.1
>> (You may need to register to be able to see the wiki.)
>> It should get you started.
>> 
>> If you require more information, please do not hesitate to ask.
>> 
>> Best regards,
>> Hermann
>> On 19.04.2012 20:49, abdel aziz wrote:
>>> 
>>> Dear all,I am a beginner student, I use GATE to simulate high energy electrons in a homogeneousmedium, please help me by showing me the steps to follow in this topic.
>>> 
>>> thank you all.    
>>> _______________________________________________
>>> Gate-users mailing list
>>> Gate-users at lists.opengatecollaboration.org
>>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>>> 
>> 
>> 
>> 
>> ------------------------------
>> 
>> _______________________________________________
>> Gate-users mailing list
>> Gate-users at lists.opengatecollaboration.org
>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
>> 
>> End of Gate-users Digest, Vol 71, Issue 19
>> ******************************************
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.opengatecollaboration.org
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users

More information about the Gate-users mailing list