[Gate-users] Re : Re : LMF output in Gate 6.1
Harald Braun
harald.braun at imp.uni-erlangen.de
Tue Apr 5 16:59:57 CEST 2011
I suggest to use the complete archive
(http://www.sendspace.com/file/f36uzg). This one is still up.
Unfortunately I did not download the 2 MB one.
Best regards,
Harald
On 05.04.2011 13:53, Samuel BURG wrote:
> Good !
>
> If you still have the original archive, can you upload it somewhere
> and post the link on the mailing list ?
> some other people need it.
>
> thanks,
> -----------------------------------------------------------
> Samuel Burg
>
> Mail : <samuel_burg at yahoo.fr>
> -----------------------------------------------------------
> "Aw, come on, who would be so stupid as to insert a cast
> to make an error go away without actually fixing the error?"
> Apparently everyone.
> -- Raymond Chen --
> -----------------------------------------------------------
>
>
> ------------------------------------------------------------------------
> *De :* Harald Braun <harald.braun at imp.uni-erlangen.de>
> *À :* Samuel BURG <samuel_burg at yahoo.fr>
> *Envoyé le :* Mar 5 avril 2011, 13h 47min 16s
> *Objet :* Re: Re : [Gate-users] LMF output in Gate 6.1
>
> Hello Samuel,
>
> thanks a lot for your hint.
> I actually saw the mentioned posting before and used the lmf tar from
> it but missed the patches for the gate source code. Now everything
> works fine.
>
>
> Best regards,
>
> Harald
>
>
>
> On 05.04.2011 10:25, Samuel BURG wrote:
>> Hi,
>>
>> you question has already been asked ten times.
>> well, we should publish a patched version of lmf3 for gate.
>> I think you have a x86_64 bits system/gcc, and there is a bug with
>> the lmf output.
>>
>> The patch has been post in the list severals weeks ago.
>> let's see if I found it ...
>>
>> ok, try this one :
>> http://lists.opengatecollaboration.org/mailman/private/gate-users/2010-October/004575.html
>>
>> Those patch/install are for gate 5.x.x, but you can read them and use
>> it to patch your gate 6.x.x
>> If I remember well this should solve your lmf3 issue.
>>
>> regards,
>> -----------------------------------------------------------
>> Samuel Burg
>>
>> Mail : <samuel_burg at yahoo.fr>
>> -----------------------------------------------------------
>> "Aw, come on, who would be so stupid as to insert a cast
>> to make an error go away without actually fixing the error?"
>> Apparently everyone.
>> -- Raymond Chen --
>> -----------------------------------------------------------
>>
>>
>> ------------------------------------------------------------------------
>> *De :* Harald Braun <harald.braun at imp.uni-erlangen.de>
>> *À :* gate-users at lists.opengatecollaboration.org
>> *Envoyé le :* Mer 23 mars 2011, 11h 52min 02s
>> *Objet :* [Gate-users] LMF output in Gate 6.1
>>
>> Dear Gate community,
>>
>> I finished installing Gate 6.1 on a virtual Ubuntu machine and
>> compilation and linking worked fine, including ECAT and LMF support.
>> However when I start a simulation (that by the way worked fine in
>> vGate 1.0) I always get the error message
>>
>> [G4] GateToLMF::RecordEndOfEvent::GateCoincidenceDigiCollection not found
>>
>> a couple of times and only a small LMF output file some bytes in size
>> is generated. I'm not sure what I can do to alleviate that situation.
>> I already tried installing a different version of Geant (4.9.3p02
>> instead of 4.9.4p01) but the problem persists.
>>
>> Any hint in the right direction would be greatly appreciated.
>>
>>
>> Kind regards,
>>
>> Harald
>>
>>
>> -- Harald Braun, Dipl.-Phys. Univ.
>> Institute of Medical Physics - Section for MR Imaging
>> University of Erlangen-Nuremberg
>> Henkestr. 91
>> 91052 Erlangen, Germany
>> phone: +49-(0)9131/85-25544
>> harald.braun at imp.uni-erlangen.de
>> <mailto:harald.braun at imp.uni-erlangen.de>
>> <mailto:harald.braun at imp.uni-erlangen.de
>> <mailto:harald.braun at imp.uni-erlangen.de>>
>> _______________________________________________
>> Gate-users mailing list
>> Gate-users at lists.opengatecollaboration.org
>> <mailto:Gate-users at lists.opengatecollaboration.org>
>> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users
More information about the Gate-users
mailing list