[Gate-users] Re : Re : Re : LMF output in Gate 6.1

[Samuel BURG]

Hello,

It seems the links are dead ...

I will ask Alexandre to upload a new one and send the link on the mailing list.

Please check your gate version about that. We have builded all the patches for 
Gate 5, so you have to do it manually if you are using Gate 6.

 
regards,
-----------------------------------------------------------
Samuel Burg


Mail : <samuel_burg at yahoo.fr>
-----------------------------------------------------------
"Aw, come on, who would be so stupid as to insert a cast
to make an error go away without actually fixing the error?"
Apparently everyone. 
-- Raymond Chen --
-----------------------------------------------------------




________________________________
De : "dounia84 at aol.com" <dounia84 at aol.com>
À : samuel_burg at yahoo.fr
Envoyé le : Mar 5 avril 2011, 13h 24min 56s
Objet : Re : [Gate-users] Re :  LMF output in Gate 6.1

Hello, 

I am also running on a x86_64 bits system and I would like to have the answer to 
my problem for months now but I cannot reach the links of any archives that are 
published in the mailing list. How can I get the authorization to the archives?

Thank you in advance,
Sincerely,
Dounia Taleb




-----E-mail d'origine-----
De : Samuel BURG <samuel_burg at yahoo.fr>
A : Harald Braun <harald.braun at imp.uni-erlangen.de>; gate-users 
<gate-users at lists.opengatecollaboration.org>
Envoyé le : Mardi, 5 Avril 2011 6:25
Sujet : [Gate-users] Re :  LMF output in Gate 6.1


Hi,

you question has already been asked ten times.
well, we should publish a patched version of lmf3 for gate.
I think you have a x86_64 bits system/gcc, and there is a bug with the lmf 
output.

The patch has been post in the list severals weeks ago.
let's see if I found it ...

ok, try this one :
http://lists.opengatecollaboration.org/mailman/private/gate-users/2010-October/004575.html
   Those patch/install are for gate 5.x.x, but you can read them and use it to  
patch your gate 6.x.x If I remember well this should solve your lmf3 issue.  
regards,   ----------------------------------------------------------- Samuel 
Burg   Mail : <samuel_burg at yahoo.fr>
-----------------------------------------------------------
"Aw, come on, who would be so stupid as to insert a cast
to make an error go away without actually fixing the error?"
Apparently everyone. 
-- Raymond Chen --
-----------------------------------------------------------




________________________________
De : Harald Braun <harald.braun at imp.uni-erlangen.de>
À : gate-users at lists.opengatecollaboration.org Envoyé le : Mer 23 mars 2011, 11h 
52min 02s Objet : [Gate-users] LMF output in Gate 6.1  Dear Gate community,  I 
finished installing Gate 6.1 on a virtual Ubuntu machine and compilation and  
linking worked fine, including ECAT and LMF support. However when I start a  
simulation (that by the way worked fine in vGate 1.0) I always get the error  
message  [G4] GateToLMF::RecordEndOfEvent::GateCoincidenceDigiCollection not 
found  a couple of times and only a small LMF output file some bytes in size is  
generated. I'm not sure what I can do to alleviate that situation. I already  
tried installing a different version of Geant (4.9.3p02 instead of 4.9.4p01) but   
the problem persists.  Any hint in the right direction would be greatly 
appreciated.   Kind regards,  Harald   -- Harald Braun, Dipl.-Phys. Univ. 
Institute of Medical Physics - Section for MR Imaging University of 
Erlangen-Nuremberg Henkestr. 91 91052 Erlangen, Germany phone: 
+49-(0)9131/85-25544 harald.braun at imp.uni-erlangen.de 
<mailto:harald.braun at imp.uni-erlangen.de>
_______________________________________________
Gate-users mailing list
Gate-users at lists.opengatecollaboration.org 
http://lists.opengatecollaboration.org/mailman/listinfo/gate-users 
_______________________________________________ Gate-users mailing list 
Gate-users at lists.opengatecollaboration.org 
http://lists.opengatecollaboration.org/mailman/listinfo/gate-users