[Gate-users] (no subject)

[Marcin Balcerzyk]

Dear Cindy.

 

I created and used with Gate 3.0.0 a system of two detectors and it was
working perfectly. What preoccupies me in your macro, is that you define
elements of the detector AFTER repeater. I would do repetition only when the
subelements of one detector are all set.

 

Kind regards

 

Marcin Balcerzyk,

Unidad Ciclotron,

Centro Nacional de Aceleradores,

Universidad de Sevilla,

 

Message: 3

Date: Fri, 22 Oct 2010 13:45:08 +0800

From: cindy Dong < <mailto:zjxiaoxia1118 at gmail.com> zjxiaoxia1118 at gmail.com>

Subject: Re: [Gate-users] The gateCoincidengces.dat is empty

To: Marlen Priegnitz < <mailto:m.priegnitz at fzd.de> m.priegnitz at fzd.de>

Cc:  <mailto:gate-users at lists.opengatecollaboration.org>
gate-users at lists.opengatecollaboration.org

Message-ID:

      <
<mailto:AANLkTimv9vt8sEYnzMeVpcguiiQ08yAudqBiay9ZoeMa at mail.gmail.com>
AANLkTimv9vt8sEYnzMeVpcguiiQ08yAudqBiay9ZoeMa at mail.gmail.com>

Content-Type: text/plain; charset=ISO-8859-1

 

Hi Marlen,

  Thanks a lot for your help,but after i add
/gate/digitizer/Coincidences/minSectorDifference 1 it doesn't work either.I
list part of my file,can you help me find what's wrong with my system?

 

#SYSTEM

/gate/world/daughters/name PETscanner

/gate/world/daughters/insert box

/gate/PETscanner/setMaterial Air

/gate/PETscanner/geometry/setXLength 50. mm
/gate/PETscanner/geometry/setYLength 6. mm
/gate/PETscanner/geometry/setZLength 100. mm
/gate/PETscanner/placement/setTranslation 0 27.65 0 mm
/gate/PETscanner/vis/forceWireframe

/gate/PETscanner/repeaters/insert ring

/gate/PETscanner/ring/setRepeatNumber 2

 

# level1

/gate/PETscanner/daughters/name level1

/gate/PETscanner/daughters/insert box

/gate/level1/setMaterial Water

/gate/level1/geometry/setXLength 44 mm

/gate/level1/geometry/setYLength 5.3 mm

/gate/level1/geometry/setZLength 96.8 mm /gate/level1/vis/setColor grey
/gate/level1/vis/forceWireframe

 

#level2

/gate/level1/daughters/name level2

/gate/level1/daughters/insert box

/gate/level2/geometry/setXLength 2.05 mm /gate/level2/geometry/setYLength 5.
mm /gate/level2/geometry/setZLength 2.05 mm /gate/level2/setMaterial BGO
/gate/level2/vis/setColor yellow /gate/level2/vis/forceWireframe

 

#REPEAT  CRYSTAL

/gate/level2/repeaters/insert cubicArray
/gate/level2/cubicArray/setRepeatNumberX 20
/gate/level2/cubicArray/setRepeatNumberY 1
/gate/level2/cubicArray/setRepeatNumberZ 44
/gate/level2/cubicArray/setRepeatVector 2.2 0 2.2 mm

 

#ATTACH Volumes To a SYSTEM

/gate/systems/PETscanner/level1/attach level1
/gate/systems/PETscanner/level2/attach level2 /gate/level2/attachCrystalSD

 

Thanks a lot,

Cindy