[Gate-users] Moby phantom

[adibpour]

Hi,

Thanks for your help.I've carried out some changes that you mentioned,but after this command i still had this error

ERROR - G4Box()::G4Box(): 
> Dimensions too small ! - 0, 0, 0

after inserting

On Sat, 29 May 2010 22:41:05 +0430, AliAsghar Parach wrote 
> I think you have a few mistakes in your sent files; as below: 
> 1-in your moby.h33 change 1 to 3. !maximum pixel count := +1 
> 2- change centre-centre slice separation (pixels) := +0.000+00 to 0.8 
> 3- you defined visulisation commands in your main.mac file and but you disabled your visulisation in moby.mac file it seems wrong. 
> 4- you should disable /gate/geometry/enableAutoUpdate in moby.mac file. i think this command is by rebuild command that you used in your macros. 
> 5- if you used gate_6 some commands is changed in gate_6 compare with previous versions, such as physics definition , .... 
>   
> hope this help you. 
> 
> On Sat, May 29, 2010 at 5:51 PM, adibpour <adibpour at razi.tums.ac.ir> wrote: 
>

Dear gate-users, 
> I'm trying to implement Moby phantom in gate. 
> When i enter the commands line by line,after this command 
> 
> /gate/moby/interfileReader/readFile moby.i33 
> 
> i encounter this erchangror: 
> 
>  *** Break *** segmentation violation 
>  0x033f0994 in _IO_vfscanf + 0x2904 from /lib/tls/i686/cmov/libc.so.6 
>  0x033f4453 in vfscanf + 0x33 from /lib/tls/i686/cmov/libc.so.6 
>  0x033f449f in fscanf + 0x1f from /lib/tls/i686/cmov/libc.so.6 
>  0x00556a5b in _ZN32GateGeometryVoxelInterfileReader7ReadKeyEP8_IO_FILE + 
> 0x5b 
> from /home/gate/Progs/Gate/gate_v6.0_p01/tmp/Linux-g++/Gate/libGate.so 
> 
> and when i run the moby.mac file  ,the problem below occurs: 
> 
> ERROR - G4Box()::G4Box(): 
> Dimensions too small ! - 0, 0, 0 
> 
> I have enclsed all my files in attachment. 
> any help would be appreciated. 
> 
> Best Regards 
> -- 
> Farzaneh Adibpour 
> 
> MSc Student, Department of Medical physics and Biomedical Engineering,Tehran 
> University of Medical Sciences 
> Member of Medical Imaging Systems Research Group, Research Center for 
> Science 
> and Technology in Medicine 
> Email: adibpour at razi.tums.ac.ir 
>       f.adibpour at gmail.com 
> 
> Cell phone:+989123679749 
> 
> 
> -- 
> This message has been scanned for viruses and 
> dangerous content by MailScanner, and is 
> believed to be clean. 
> 
> 
> _______________________________________________ 
> Gate-users mailing list 
> Gate-users at lists.opengatecollaboration.org 
> http://lists.opengatecollaboration.org/mailman/listinfo/gate-users 
> 
> 
> -- 
> Ali Asghar Parach,Ph.D. student in Medical Physics,Tarbiat Modares University,Tehran,Iran 
> 
> -- 
> This message has been scanned for viruses and 
> dangerous content by MailScanner, and is 
> believed to be clean.

-- 
Farzaneh Adibpour

MSc Student, Department of Medical physics and Biomedical Engineering,Tehran 
University of Medical Sciences 
Member of Medical Imaging Systems Research Group, Research Center for Science 
and Technology in Medicine 
Email: adibpour at razi.tums.ac.ir 
      f.adibpour at gmail.com

Cell phone:+989123679749

/gate/world/daughters/insert parameterizedBoxMatrix

 instead of

/gate/world/daughters/insert regularMatrix

this error will be appeared:

'!ror: Could not open header file 'moby.i33 
Idle> /gate/geometry/rebuild 
G4PhysicalVolumeModel::Validate() called. 
 Volume of the same name and copy number ("world_phys", copy 0) still exists 
and is being used. 
 WARNING: This does not necessarily guarantee it's the same 
 volume you originally specified in /vis/scene/add/.

Please find the attachment.

any help will be highly appreciated.

 

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: moby.zip
Type: application/x-zip-compressed
Size: 20894 bytes
Desc: not available
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20100530/802e59ae/attachment-0001.bin>