[Gate-users] Re : Re : Re : Request Assistance with LMF to GATE

[Samuel BURG]

Hi,

I have never used STIR at all, so about STIR I cannot help you a lot.
About LMF3/ECT7, what I send to you is the source code of the library you need to compile and link with the software you need to read/write LMF3/ECAT7 data.

So if for example you want to write LFM3 data with GATE, use this lib when you link GATE and activate the LMF3 output.
If you need to read LMF3 data from an other software, link the software with LMF lib and then use the "read LMF data option" in your software (STIR or anything else).

Regards,

Samuel

 -----------------------------------------------------------
Samuel Burg


Mail : <samuel_burg at yahoo.fr>
-----------------------------------------------------------
"Aw, come on, who would be so stupid as to insert a cast
to make an error go away without actually fixing the error?"
Apparently everyone. 
-- Raymond Chen --
-----------------------------------------------------------




________________________________
De : Michelle Andrews <michelle.z.andrews at gmail.com>
À : Samuel BURG <samuel_burg at yahoo.fr>
Envoyé le : Mer 2 juin 2010, 17h 55min 03s
Objet : Re: Re : Re : Request Assistance with LMF to GATE

Samuel,

Thank you very much for this. Just wanted to confirm, if I have my scanner output set to LMF, would this package be sufficient to act as an interface between GATE LMF and STIR.

Appreciate your response.

Cordially,
Michelle. 


On Tue, Jun 1, 2010 at 12:54 PM, Samuel BURG <samuel_burg at yahoo.fr> wrote:

Oups, 
>
>sorry completely forgotten this.
>
>here you can find 2 modifications for ECAT7 and for LMF3, If I remember I have made some update in the makfiles to be able to easily compile those libs for Gate.
>
>those both libs compile and link with Gate 3.X 4.X and 5.X, have not been tested with 6.X
>
>best regards,
>
>Samuel
>
> -----------------------------------------------------------
>Samuel Burg
>
>
>Mail : <samuel_burg at yahoo.fr>
>-----------------------------------------------------------
>"Aw, come on, who would be so stupid as to insert a cast
>>to make an error go away without actually fixing the error?"
>Apparently everyone. 
>-- Raymond Chen --
>-----------------------------------------------------------
>
>
>
>
>
________________________________
De : Michelle Andrews <michelle.z.andrews at gmail.com>
>À : Samuel BURG <samuel_burg at yahoo.fr>
>Envoyé le : Mar 1 juin 2010, 15h 34min 12s
>Objet : Re: Re : Request Assistance with LMF to GATE
>
>
>Samuel,
>
>I am sorry to bother you again, but please accept my kind reminder to help me out with LMF3 for Gate code.
>
>Many Thanks!
>
>Cordially,
>Michelle.
>
>
>On Fri, May 28, 2010 at 6:13 AM, Samuel BURG <samuel_burg at yahoo.fr> wrote:
>
>Hi,
>>
>>I will check what I have on this, and I will send you a tra.gz file with my modified LMF3 for GATE (it could be compatible with STIR, but don't know exactly about this).
>>
>>regards,
>>
>>Samuel
>>
>> -----------------------------------------------------------
>>Samuel Burg
>>
>>
>>Mail : <samuel_burg at yahoo.fr>
>>>>
>>
>>-----------------------------------------------------------
>>"Aw, come on, who would be so stupid as to insert a cast
>>to make an error go away without actually fixing the error?"
>>Apparently everyone. 
>>>>
>>
>>-- Raymond Chen --
>>-----------------------------------------------------------
>>
>>
>>
>>
>>>>
>>
>>
________________________________
De : Michelle Andrews <michelle.z.andrews at gmail.com>
>>À : samuel_burg at yahoo.fr
>>Envoyé le : Ven 28 mai 2010, 0h 36min 01s
>>Objet : Request Assistance with LMF to GATE
>>
>>
>> >>
>>Hello Samuel,
>>
>>
>>I saw this post on GATE/STIR mailing list. I am having the exact same problem of converting lmf output projection data to STIR compatible input data. I saw u posted a link (a 
>>modified version of LMF_3.0)trying to help Liliana, however, I am not able to download it in a correct format.
>>>>
>>
>>
>>
>>I will highly appreciate your assistance, if you could please address this issue.
>>
>>
>>Thank you.
>>
>>
>>Cordially,
>>Michelle.
>>
>>
>>
>> 
>>On
>>Thu, Sep 25, 2008 at 11:00 PM, Samuel BURG <samuel_burg at yahoo.fr>
>>wrote:
>>>
>>Hello,
>>> 
>>>
>>here's a modified version of LMF_3.0 and ecat_7 that compiles and links with
>>GATE 3.1.2 and GATE 4.0.0.
>>>
>>I have never test if the output are consitent. Let me know about this, thanks.
>>> 
>>> 
>>>
>>to use the attached file, look in my post [some help about Gate 4.0.0 under
>>Fedora Core and Ubuntu TSL] send on the [...AjouterLundi, 1 Septembre 2008,
>>18h09mn 31s],
>>>
>>there's a litle help in it (but usefull only for peoples skilled in linux
>>system, sorry)
>>> 
>>>
>>Best regards,
>>> 
>>>
>>Samuel Burg
>> 
>>> ----- Message d'origine ----
>>> De : Liliana Caldeira <llcaldeira at gmail.com>
>>> À : gate-users at lists.healthgrid.org
>>> Envoyé le : Jeudi, 25 Septembre 2008, 19h16mn 59s
>>> Objet : [Gate-users] LMF on STIR
>>> 
>>> Hello everyone,
>>> 
>>> The LMF code on the STIR website is incomplete unfortunately. Does
>>> anyone have a more complete version than the one in STIR website? I
>>> suppose some people that use GATE should have it as I was told in the
>>> STIR-users mailing list.
>>> 
>>> Thank you for your help,
>>> Liliana Caldeira
>> 
>>
>
>