[Gate-users] attachCrystalSD

[Sebastien JAN]

Hi Khalid,

Before the SD setting, you need to attach your volumes with the system 
hierarchy.
In your case, it should be described by following command lines :

/gate/systems/SPECThead/crystal/attach   your_crystal_volume_name
/gate/systems/SPECThead/pixel/attach      your_pixel_volume_name

and then :
/gate/your_crystal_volume_name/attachCrystalSD
/gate/your_pixel_volume_name/attachCrystalSD

Hope this help
Seb

> Dear GATE Users,
>  
> I am trying to model SPECT system with 2 parts: one is pixellated and 
> the second is continuous. The problem is when I attach SD detector 
> after each part using the following commands:
>
> For pixels part:
>
> /gate/pixel/attachCrystalSD
>
> For continuous part:
>
> /gate/crystal/attachCrystalSD
>
> It seems to me GATE  takes into account only pixellated part as I am 
> getting the same output whether with continues or without it.
>
> Could you please comment on that? Has anyone developed GATE to 
> consider more than one SD detector?
>
> Kind regards,
>
> Khalid
>
>  
> ---------------------------------------------------------------
> Khalid Alzimami
> Department of Physics
> School of Electronics & Physical Sciences
> University of Surrey
> Guildford,
> GU2 7XH
> UK
> tel. /+44-1483-689423/
> fax. +44-1483-682724
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Gate-users mailing list
>Gate-users at lists.healthgrid.org
>http://lists.healthgrid.org/mailman/listinfo/gate-users
>  
>