[Gate-users] Gate+Dual Core Machine

[Simon Stute]

Hi Georgi,

I think that the 50% is an average measure and that Gate uses only one core
but at 100%. Because Gate is not actually able to split itself on two
processors. If you want to use all your CPU power, you have to split your
simulation in two peaces along the time and launch both at the same time.

Cheers,
Simon

2007/7/26, Georgi Gerganov <ggerganov at gmail.com>:
>
> Hello everyone,
>
> I have installed Gate v3.1.1 on a Dual Core CPU Machine, but it seems that
> the simulations do not use all the CPU power. During a simulation both Cores
> are about 50% idle. Is there any way to make Gate use all the potential of
> the machine?
>
> Thanks in advance,
> Georgi
>
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.healthgrid.org
> http://lists.healthgrid.org/mailman/listinfo/gate-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opengatecollaboration.org/mailman/private/gate-users/attachments/20070726/dcef1e8e/attachment.htm>