[Gate-users] benchmarkPET and examples digitizer command not found

[John Norton]

Hello,

Yes there are 2 instances of sensitive detector decleration.  However, the 
macro I am talking about is in fact the benchmarkPET that is included with 
the Gate distribution (v3.1.1).  So I would think the macro should be 
working in it's original state.

Thanks for your help,

Jack


On Wed, 25 Jul 2007, Kerhoas-Cavata  Sophie wrote:

>
>
> Hello,
>  Did you declare one type of volume of your detectors as a sensitive detector with the command
> /gate/volumename/attachCrystalSD?
> Perhpas it's the reason that Gate doesn't recognize the adder.
> hope this help
> bye
> Sophie
>
> -----Original Message-----
> From: gate-users-bounces at lists.healthgrid.org on behalf of John Norton
> Sent: Wed 7/25/2007 12:59 PM
> To: gate-users at lists.healthgrid.org
> Subject: [Gate-users] benchmarkPET and examples digitizer command not found
>
>
> Hello,
>
> I have a fresh compile of all gate and supporting tools, and I would like to
> run the benchmarkPET macro(as well as the example macros) but I am having some
> trouble.  I am getting the following error: ***** COMMAND NOT FOUND
> </gate/digitizer/Singles/insert adder> *****
>
> I have looked through the gate-users list several times, and have found a
> similar occurance, but no resolve was ever posted.  Have I missed something?
> Although I am familiar with geant4, I admit I don't use alot of macros, and I
> don't know how to really find the _real_ problem behind this error.
>
> I have tried with both Gate_v3.1.1 and Gate_v3.1.0 with no change in error. It
> also seems that all of the commands in '/gate/digitizer/Singles' can't be
> found.
>
> My environment is as follows: redhat EL i386 gcc 3.4.6 CLHEP 1.9.3.2 ROOT 5.12
> geant4 8.1
>
> important env variables:
>
> GATEHOME=$HOME/GATE/gate_v3.1.0 G4ANALYSIS_USE_ROOT=1
> G4ANALYSIS_USE_ROOT_PLOTTER=1 G4VERSION8=1 G4VERSION8_1=1 G4WORKDIR=/tmp/jng4
> G4SYSTEM=Linux-g++ G4VERSION=8.1 G4INSTALL=$HOME/geant/geant4.8.1
> G4LIB=$G4INSTALL/lib G4LEVELGAMMADATA=$G4INSTALL/data/PhotonEvaporation2.0
> G4RADIOACTIVEDATA=$G4INSTALL/data/RadiativeDecay3.0
> G4LEDATA=$G4INSTALL/data/G4EMLOW4.0
> NeutronHPCrossSections=$G4INSTALL/data/G4NDL3.9
> G4ELASTICDATA=$G4INSTALL/data/G4ELESTIC1.1 CLHEP_BASE_DIR=$HOME/CLHEP
> CLHEP_INCLUDE_DIR=$CLHEP_BASE_DIR/include CLHEP_LIB_DIR=$CLHEP_BASE_DIR/lib
> CLHEP_LIB=CLHEP G4VIS_BUILD_RAYTRACER_DRIVER=1 G4VIS_USE_RAYTRACER_DRIVER=1
> G4VIS_BUILD_OPENGLX_DRIVER=1 G4VIS_USE_OPENGLX=1 G4VIS_BUILD_VRML_DRIVER=1
> G4VIS_USE_VRML_DRIVER=1 G4LIB_USE_GRANULAR=1
>
> my geant sims run fine, as do the geant4 examples (the ones I tried).
>
> I am sorry if this is an obvious question, but I really could not find the
> answer.
>
> Thanks in advance,
>
> Jack Norton
> _______________________________________________
> Gate-users mailing list
> Gate-users at lists.healthgrid.org
> http://lists.healthgrid.org/mailman/listinfo/gate-users
>
>