[Gate-users] forceWireframe doesn't work

[venialgo_e]

Hello Gate Users,
I installed Gate 3.2.1,Geant 4.9.0, Root 5.14, CLHEP 2.0.3.2, running  
on Debian   64 bits 4.0r1. Gate is working, but the command  
forceWireframe not. Before the
command "/gate/cylindricalPET/vis/forceWireframe" is executed I can  
see the cylinder, but after the commnad's execution the cylinder  
disappears completely. My computer's job is a Dual-Core Intel,  
motherboard ASROCK with chipset Intel 865G.
Also I installed the same configuration on my laptop DELL inspiron  
1521 with Video chipset ATI 1270, and in that computer all is working  
so good.

I think that problem is due to the chipset, and the problem is very  
specific, but maybe someone had the same problem.

         Thanks in advance.

         Esteban Venialgo





# VISUALIZATION
/vis/open OGLOX
/vis/viewer/reset
/vis/viewer/set/viewpointThetaPhi 60 60
/vis/viewer/zoom 1
/vis/viewer/set/style surface
/vis/drawVolume
/tracking/storeTrajectory 1
/vis/scene/endOfEventAction accumulate
/vis/viewer/update
/gate/geometry/enableAutoUpdate

# WORLD
/gate/world/geometry/setXLength 40. cm
/gate/world/geometry/setYLength 40. cm
/gate/world/geometry/setZLength 40. cm

/gate/world/daughters/name vol_name

# SYSTEM
/gate/world/daughters/name cylindricalPET
/gate/world/daughters/insert cylinder
/gate/cylindricalPET/setMaterial Water
/gate/cylindricalPET/geometry/setRmax 100 mm
/gate/cylindricalPET/geometry/setRmin 86 mm
/gate/cylindricalPET/geometry/setHeight 18 mm
/vis/viewer/set/globalLineWidthScale 4
/gate/cylindricalPET/vis/setColor red
/gate/cylindricalPET/vis/forceWireframe

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.