[gate-users] executing after installation

[Mutanga Theodore]

Hello,

if you are looking for the executable go to
/usr/local/GATE/bin/Linux-g++

According to your post that is where Gate will be installed.


cheers

> Dear all,
>
> I have installed Gate v 2.2.0 and get the following display.
>
>
>
> $ source env_gate.csh
> The current value of G4INSTALL is: /usr/local/geant4.7.0.p01
> The current value of G4VERSION is: 7.0
>
> Launching Geant4 configuration script /usr/local/geant4.7.0.p01/env.csh
>
> On this machine the G4SYSTEM=Linux-g++
> On this machine the G4INSTALL=/usr/local/geant4.7.0.p01
> On this machine the G4LIB=/usr/local/geant4.7.0.p01/lib
> On this machine the
> G4LEVELGAMMADATA=/usr/local/geant4.7.0.p01/data/PhotonEvapor
> ation
> On this machine the
> G4RADIOACTIVEDATA=/usr/local/geant4.7.0.p01/data/RadiativeDe
> cay
> On this machine the G4LEDATA=/usr/local/geant4.7.0.p01/data/G4EMLOW2.3
> On this machine the
> NeutronHPCrossSections=/usr/local/geant4.7.0.p01/data/G4NDL3
> .7
> On this machine the G4ELASTICDATA=/usr/local/geant4.7.0.p01/data/Elastic
> On this machine the CLHEP_BASE_DIR=/usr/local/CLHEP
> On this machine the CLHEP_INCLUDE_DIR=/usr/local/CLHEP/include
> On this machine the CLHEP_LIB_DIR=/usr/local/CLHEP/lib
> On this machine the CLHEP_LIB=CLHEP
> On this machine the G4ANALYSIS_USE=1
> On this machine the G4UI_BUILD_XAW_SESSION=1
> On this machine the G4UI_USE_XAW=1
> On this machine the G4UI_BUILD_XM_SESSION=1
> On this machine the G4UI_USE_XM=1
> On this machine the G4VIS_BUILD_DAWN_DRIVER=1
> On this machine the G4VIS_BUILD_OPENGLX_DRIVER=1
> On this machine the G4VIS_BUILD_OPENGLXM_DRIVER=1
> On this machine the G4VIS_BUILD_OIX_DRIVER=1
> On this machine the G4VIS_BUILD_VRML_DRIVER=1
> On this machine the G4VIS_USE_DAWN=1
> On this machine the G4VIS_USE_OPENGLX=1
> On this machine the G4VIS_USE_OPENGLXM=1
> On this machine the G4VIS_USE_OIX=1
> On this machine the G4VIS_USE_VRML=1
> On this machine the OGLHOME=/usr/local/MesaGL
> On this machine the G4LIB_BUILD_SHARED=1
> On this machine the G4LIB_BUILD_STATIC=1
> On this machine the G4LIB_USE_GRANULAR=1
> On this machine the G4UI_USE_TCSH=1
> In your environment you have the G4WORKDIR=/usr/local/geant4.7.0.p01
>
> Configuring GATE options
>
> G4WORKDIR set to .
> G4TMP set to ./tmp
> G4BIN set to ./bin
> Data analysis and output features enabled
> Ascii data output enabled
> Checking your LD_LIBRARY_PATH variable...
>  ==> OK: /usr/local/bin/root/lib added to your LD_LIBRARY_PATH
> Use of ROOT enabled
> ROOT real-time plotter disabled
> LMF data output disabled
> ECAT7 data output disabled
> GATEHOME is set to /usr/local/GATE
> Checking your path variable...
>  ==> OK: /usr/local/GATE/bin/Linux-g++ added to your path variable
> G4VERSION4 is not set: GATE will use the code compatible with Geant4
> version >=                        5.0
> G4VERSION5_1 is set: GATE will use the run manager compatible with the
> Geant4 ve                       rsion = 5.1
> G4VERSION5_2 is set: GATE is compatible with the Geant4 version = 5.2
> G4VERSION6_2 is set: GATE is compatible with the Geant4 version = 6.2
> G4VERSION7_0 is set: GATE is compatible with the Geant4 version = 7.0
>
> Done
> ___________________________________________________
>
>
>
> I am unable to run gate using $ Gate and get the error "Gate": Command not
> found.
>
>
>
> Please note I have the required tools LMF, ROOT, GEANT4 7.0 and CLHEP
> installed.
>
>
>
> Regards,
> Sweta
>
>
>
> ---------------------------------
>  Yahoo! India Matrimony: Find your partner
> now._______________________________________________
> gate-users mailing list
> gate-users at lphe1pet1.epfl.ch
> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>