[gate-users] Re : Sinogram output / ecat7 output

[Claude Comtat]

Hi Hubert,

I checked your macro. According to the user's guide:

> At the end of each run, the contents of the 2D sinograms can 
 > be optionally written to a raw file (one per run).
 > This feature has to be enable :
> 
> /gate/output/sinogram/RawOutputEnable
> 
> The name of the file is specified by: 
> /gate/output/sinogram/setFileName MySinogramFileName
> 

I did not see the /gate/output/sinogram/RawOutputEnable command in your 
macro.

Regards,

Claude


HUBERT Xavier 211075 wrote:

> Hi,
> 
> I have enclosed the example PET_Ecat_system.mac which I have modified by
> commenting out the lines corresponding to ecat7 output. And when I run it
> with Gate, no *.ima nor *dim nor *.info are generated.
> 
> Thanks in advance
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> gate-users mailing list
> gate-users at lphe1pet1.epfl.ch
> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users

-- 
Claude Comtat					comtat at ieee.org
Image Acquisition and Processing group		tel: +33 1 69 86 78 01
Frédéric Joliot Hospital Facility		fax: +33 1 69 86 77 49
French Atomic Energy Commission 		www-dsv.cea.fr/shfj