[gate-users] benchmarkPET

[Yun Dong]

Hi Ross,

I exactly install every package with right order, and I could run the 
novice examples coming with Geant4. Yesterday, I run the simulation 
example in the Chapter 1 of GATEUserGuide document downloaded from the 
internet; it look like being finished rightly. 

Thanks
Yun

----- Original Message -----
From: "Schmidtlein, Ross/Sloan-Kettering Institute" 
<schmidtr at mskcc.org>
Date: Thursday, March 24, 2005 11:19 am
Subject: RE: RE: [gate-users] benchmarkPET

> Hi Fernando and Yun,
> 
> The latest version of GATE v1.2.0 does run on Geant4.7.0p01.  I have
> recently compiled it and run the benchmark with no problems and 
> lookingat you system and version everything looks ok.  I am pretty 
> sure that
> several people have run GATE on Fedora Core 1.
> 
> I am assuming that you are installing the components in the proper
> order.
> 
> CLHEP before Geant4
> Root and Geant4 before GATE.
> 
> And that they each installed OK?
> 
> The installation of Geant4 can be tricky.  I have attached an old
> document that is abit out of date but is still very useful.  See 
> if that
> helps.
> 
> ross
> 
> -----Original Message-----
> From: gate-users-bounces at lphe1pet1.epfl.ch
> [mailto:gate-users-bounces at lphe1pet1.epfl.ch] On Behalf Of Fernando
> Rannou
> Sent: Thursday, March 24, 2005 8:05 AM
> To: GATE feedback and helpline for Users
> Subject: Re: RE: [gate-users] benchmarkPET
> 
> 
> Hi,
> Does Gate run on Geant4.7.0.p01?
> 
> Fernando
> 
> On Thu, 2005-03-24 at 10:54 -0600, Yun Dong wrote:
> > Hi ross,
> > 
> > They are
> > Fedora Core 1
> > gcc 3.3.2
> > Root 4.02, 
> > CLHEP 1.8.1.0, 
> > Geant4.7.0.p01
> > GATE1.2.0
> > 
> > Do you have any idea? Thank you so much.
> > 
> > Regards
> > Yun
> > 
> > ----- Original Message -----
> > From: "Schmidtlein, Ross/Sloan-Kettering Institute"
> > <schmidtr at mskcc.org>
> > Date: Thursday, March 24, 2005 10:08 am
> > Subject: RE: [gate-users] benchmarkPET
> > 
> > > Hi Yun,
> > > 
> > > That's not normal at all.  Gate typically uses very little memory
> > (<40
> > > Mb) unless using voxelized geometries.  What are your Linux, 
> root, 
> > > CLHEP, GATE, and Geant4 versions?
> > > 
> > > ross
> > > 
> > > -----Original Message-----
> > > From: gate-users-bounces at lphe1pet1.epfl.ch
> > > [mailto:gate-users-bounces at lphe1pet1.epfl.ch] On Behalf Of Yun 
> Dong> > Sent: Thursday, March 24, 2005 10:52 AM
> > > To: gate-users at lphe1pet1.epfl.ch
> > > Subject: [gate-users] benchmarkPET
> > > 
> > > 
> > > Hi,
> > > Does anybody run successfully the example benchmarkPET coming 
with
> > > GATE package. When I simulated this example, I had to set very 
> > > very 
> > > huge swap space ~50G; but simulation always died with message 
> > > "Aborted 
> > > (core dumped)". The core file is about 2G. Are these 
> situations 
> > > normal? I'm a novice for GATE. It's grateful for any help for 
> me. 
> > > Thanks.
> > > 
> > > Yun
> > > _______________________________________________
> > > gate-users mailing list
> > > gate-users at lphe1pet1.epfl.ch 
> > > http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > gate-users mailing list
> > > gate-users at lphe1pet1.epfl.ch 
> > > http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
> > > 
> > _______________________________________________
> > gate-users mailing list
> > gate-users at lphe1pet1.epfl.ch 
> > http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
> 
> _______________________________________________
> gate-users mailing list
> gate-users at lphe1pet1.epfl.ch
> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
> 
> 
-------------- next part --------------
_______________________________________________
gate-users mailing list
gate-users at lphe1pet1.epfl.ch
http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users