[gate-users] Image Quality Phantom

[Mutanga Theodore]

Hi Ross, sorry to bother you again, but How do you set the bacground
source in your Image quality macros? I tried to creat sources for the four
parts of the phantom to act as background.  But the GPS commands does
permit me to use commands like
/setPhiStart 0. deg
/setDeltaPhi 180. deg

so its a bit hard to set background sources using  the four parts of the
phantom without overlap. I will be greatful for your help.

Theo

> Hi Theodore,
>
> I wrote one up some time ago when I was getting started with Gate.  I
> haven't used it much but it should be OK.
>
> ross
>
> -----Original Message-----
> From: gate-users-bounces at lphe1pet1.epfl.ch
> [mailto:gate-users-bounces at lphe1pet1.epfl.ch] On Behalf Of Mutanga
> Theodore
> Sent: Monday, December 27, 2004 5:47 PM
> To: gate-users at lphe1pet1.epfl.ch
> Subject: [gate-users] Image Quality Phantom
>
>
> Hello,
> does anyone have a macro for simulating the geometry including sources
> as depicted in the NEMA IQ phantom ? I need both the volumes and inserts
> with sources
>
> Cheers
>
>
> Theodore
> _______________________________________________
> gate-users mailing list
> gate-users at lphe1pet1.epfl.ch
> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>
> _______________________________________________
> gate-users mailing list
> gate-users at lphe1pet1.epfl.ch
> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>