[gate-users] HR+

[Kris Thielemans]

> By the way I was simulating the ECAT exact hr+ and I would 
> like to compare my results with someone Here is what I had 
> for the resolution measurements , NEMA 2001 !
> 
> transverse @ 1cm = 8.3 mm
> axial @1 cm 11.5 mm
> 
> 
> transverse radial @ 10cm = 10.59mm
> transverse tangential@ 10cm = 10.66mm
> 
> axial @10cm 10.31 mm
> 

Seems  way too low resolution to me. Should be about 5mm (measured).

The 'old' NEMA HR+ reference is Brix et al, JNM 1996

I believe Herzog, Tellman et al have a proc./paper with NEMA 2001
measurements for 'four Siemens ECAT PET-scanners'.

I thought Sebastien Jan has a paper on simulating HR+ with GATE.

Kris


PS: by the way: can we try to keep email subject lines relevant to the
topic discussed?