[gate-users] Image Reconstruction of Gate output
Nehmeh, Sadek/Medical Physics
nehmehs at mskcc.org
Tue Jan 4 18:42:16 CET 2005
> 4)These slices per segment I got from the headers created by
> creat_proj_data
>
> int num_slices_per_segment[23]
> {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,47};
> //Number of projection planes per segment
It should be {47,22,....2,1}
> 7) I didn't know how to change the 17 ? what does it do here ?
> r1 = ring1;
> while (r1<17)
> {
> r1 = ring1 + c;
> r2 = r1 - ring1;
>
>
>
17 = nRings - 1; so you should set it to 23.
The other changes look fine to me. I will post an updated version of
Gate_to_Stir.c that can tackle both GE models, as soon as I'm done with
it.
Sadek
-----Original Message-----
From: gate-users-bounces at lphe1pet1.epfl.ch
[mailto:gate-users-bounces at lphe1pet1.epfl.ch] On Behalf Of Mutanga
Theodore
Sent: Tuesday, January 04, 2005 12:14 PM
To: GATE feedback and helpline for Users
Subject: RE: RE: RE: [gate-users] Image Reconstruction of Gate output
> Here it is again.
Hi I got it this time,
How about Gate_to_Stir.c ? Did you see my mail about the changes I made
to it ? Are they ok ? I just tried to find the DLS things and replaced
them with DST things, but that may not be all,
Theo
> Sadek
>
> -----Original Message-----
> From: gate-users-bounces at lphe1pet1.epfl.ch
> [mailto:gate-users-bounces at lphe1pet1.epfl.ch] On Behalf Of Mutanga
> Theodore
> Sent: Tuesday, January 04, 2005 10:12 AM
> To: Long ZHANG; GATE feedback and helpline for Users
> Subject: Re:RE: RE: [gate-users] Image Reconstruction of Gate output
>
>
> Hello Sadek,
>
> sorry I am bothering you again but I'd like to show you the changes I
> made to your code:
>
> 1) GEAdvance3D_Sinogram_Bin.c
>
> #define NUMBER_OF_RINGS 24 // Advance/DLS)
> #define CRYSTALS_PER_RING 420 // Discov$#define
> SINOGRAM_WIDTH 249 // (or 223 according to STIR
??)
> #define MAX_THETA 11 //
> #define NUMBER_OF_PROJECTION_PLANES 553 //
> #define FOV 600 //
> #define SLICES_PER_FOV 47 //
>
>
>
> 2)
>
> // Update the different arrays...
> //-------------------------------
>
>
>
> if (u>=0 && u<223) <<<< I changed this to 223 or 249 ?
!!!!
> {
> sinogram_counts[ring2][ring1] += 1;
>
>
>
>
>
>
> 3) Gate_to_Stir.c
>
> int nRings = 24; // Number of rings in the GE Advance
> scanner
> int Num_sinos = nRings*nRings;
> int nPHI = 210; // Number of angular bins in the
> sinogram
> int nU = 223; // Number of radial bins in the
> sinogram
>
>
>
> 4)These slices per segment I got from the headers created by
> creat_proj_data
>
> int num_slices_per_segment[23]
> {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,47};
> //Number of projection planes per segment
>
>
> 5)
>
> printf("Please enter the absoute number of segments you would like to
> reconstruct (0, -> 22):
>
>
> 6)
>
> //Process segments 23->2
> //-----------------------
> printf("Processing segments 23 -> 2... \n"); for (ring1=
> (num_segments+1); ring1>1; ring1--)
> {
>
>
> 7) I didn't know how to change the 17 ? what does it do here ?
> r1 = ring1;
> while (r1<17)
> {
> r1 = ring1 + c;
> r2 = r1 - ring1;
>
>
>
> 8)
> //goto NEXT2;
>
> //Process segments -2->-23
> //------------------------
> printf("Processing segments 2 -> 23... \n");
> for (ring2=2; ring2< (num_segments + 2); ring2++)
> {
> int c = 0;
> r2 = ring2;
>
>
> Well Those are the things I modified, but I think there is a great
> deal more to change because when I use the manip_proj_data from Stir
> on the projection data, it doesn't look good at all.
>
> Hope to hear from you soon
>
> Theodore
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>> Dear Sadek,
>>
>> That's great if you can implement the DST code. It looks almost
> finished.
>>
>> My idea is to build a generic framework based on your code. With this
>> framework, the coding work will be greatly simplified for new
>> scanner. It's a abstracted layer which can call different set of
>> functions for a different
> scanner.
>> It's
>> pretty important when porting it to GATE, for not only the
> correctness,
>> but also
>> the optimised design.
>>
>> So it's very important to know root script characters, such as
> callback
>> functions,
>> or object oriented characters like dynamic binding, etc. Or I think a
>> input parameter file or a static table is needed (like STIR). I only
>> know
> root
>> is C/C++
>> like, but no deeper study.
>>
>> Helps is highly appreciated!
>>
>> Regards,
>>
>> Long
>>
>>
>>
>>
>>
>> In your mail:
>>>From:"Nehmeh, Sadek/Medical Physics" <nehmehs at mskcc.org>
>>>Reply-To: GATE feedback and helpline for Users
>>><gate-users at lphe1pet1.epfl.ch>
>>>To: "GATE feedback and helpline for Users"
> <gate-users at lphe1pet1.epfl.ch>
>>>Subject: RE: RE: [gate-users] Image Reconstruction of Gate output
>>>
>>>Dear Theodore and Long,
>>>
>>>Yes I'm back, and sorry for taking me time replying to your emails.
>>>Long, I think what you have suggested in your previous email
>>>regarding evaluating the sinogram binner for the DST, and try to
>>>incorporate it with GATE, is a great idea. Meanwhile, I am also
>>>testing that for the DST configuration. Hopefully I will get back to
>>>you tomorrow with my feedback.
>>>
>>>Theodore, for your NEMA measurements, I know O. Mawlawi at M.D.
> Anderson
>>>did the NEMA2001 measurements for the DST. It was published in the
>>>JNM (J Nucl Med. 2004 Oct;45(10):1734-42); you may wana refer to
>>>that, and reproduce their analysis method, for comparison.
>>>
>>>
>>> Cheers,
>>>
>>> Sadek
>>>
>>>
>>>
>>>Theodore
>>>Sent: Monday, January 03, 2005 11:30 AM
>>>To: Long ZHANG; GATE feedback and helpline for Users
>>>Subject: Re:RE: [gate-users] Image Reconstruction of Gate output
>>>
>>>Hi Long,
>>>it seems Sadek is back, have you written to him about the code ?
>>>
>>>Cheers
>>>
>>>Theodore
>>>
>>>By the way I was simulating the ECAT exact hr+ and I would like to
>>>compare my results with someone Here is what I had for the resolution
>>>measurements , NEMA 2001 !
>>>
>>>transverse @ 1cm = 8.3 mm
>>>axial @1 cm 11.5 mm
>>>
>>>
>>>transverse radial @ 10cm = 10.59mm
>>>transverse tangential@ 10cm = 10.66mm
>>>
>>>axial @10cm 10.31 mm
>>>
>>>
>>>I wish to find out from the GATE users if these look reasonable, I
>>>was planning to do measurements myself on the ecat but I dont have
>>>acceess to one since initially I was simulating the DST. Also in the
>>>NEMA 2001 there is no mention about matrix size for reconstruction ,
>>>doesnt this affect the resolution ? I did not correct for anythin in
>>>the data from GATE , would it be better to correct for randoms,
>>>scatter ect , if so HOW (using GATE ?)?
>>>
>>>
>>>Cheers
>>>
>>>'Theo
>>>
>>>> Dear Kris,
>>>>
>>>> Thank you very much.
>>>>
>>>> It seems that I have mistake the sinogram width (angle position) as
>>>> sinogram length (view number, or tangential bin number, or
>>>> displacement position).
>>>> Am I
>>>> right now?
>>>>
>>>> Regards,
>>>>
>>>> Long
>>>>
>>>> In your mail:
>>>>>From:"Kris Thielemans" <kris.thielemans at csc.mrc.ac.uk>
>>>>>Reply-To: GATE feedback and helpline for Users
>>>>><gate-users at lphe1pet1.epfl.ch>
>>>>>To: "'Long ZHANG'" <zhanglong99 at tsinghua.org.cn>,
>>>> "'GATE feedback and helplinefor Users'"
>>>> <gate-users at lphe1pet1.epfl.ch>
>>>>>Subject: RE: [gate-users] Image Reconstruction of Gate output
>>>>>
>>>>>>
>>>>>> BTW, I was pussled by the sinogram width of DST (420 crystal per
>>>>>> ring). The number 249 is larger than the 420/2 = 210. How can DST
>>>>>> get the extra LORs of 39? By interpolation? Could this help to
>>>>>> improve the spatial resolution? Thank you!
>>>>>>
>>>>>Notation: N= num_detectors per ring
>>>>>
>>>>>Why do you think that the max sinogram width is N /2? This is a
>>>>>hardware choice (recent CTI scanners tend to have
> sinogram_width=N/2).
>>>
>>>>>The 'physical' maximum of LORs in 2D sinograms is (N^2-N)/2 (i.e.
> all
>>>>>lines between pairs of detectors, excluding the degenerate cases,
> and
>>>>>identifying det pairs ij and ji). The max number of views is N/2
>>>>>(you'd expect N, but it's halved because of interleaving). So, the
> max
>>>
>>>>>sinogram width is something like (N-1)
>>>>>
>>>>>
>>>>>Kris
>>>>>
>>>>>_______________________________________________
>>>>>gate-users mailing list
>>>>>gate-users at lphe1pet1.epfl.ch
>>>>>http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> gate-users mailing list
>>>> gate-users at lphe1pet1.epfl.ch
>>>> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>>>>
>>>
>>>_______________________________________________
>>>gate-users mailing list
>>>gate-users at lphe1pet1.epfl.ch
>>>http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>>>
>>>
>>>
>>>
>>>
>>>
> ====================================================================>>
>>> Please note that this e-mail and any files transmitted with it
> may
>>> be
>>> privileged, confidential, and protected from disclosure under
>>> applicable law. If the reader of this message is not the
intended
>>> recipient, or an employee or agent responsible for delivering
> this
>>> message to the intended recipient, you are hereby notified that
> any
>>> reading, dissemination, distribution, copying, or other use of
> this
>>> communication or any of its attachments is strictly prohibited.
> If
>>> you have received this communication in error, please notify the
>>> sender immediately by replying to this message and deleting this
>>> message, any attachments, and all copies and backups from your
>>> computer.
>>>
>>>
>>>_______________________________________________
>>>gate-users mailing list
>>>gate-users at lphe1pet1.epfl.ch
>>>http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>>>
>>
>>
>> _______________________________________________
>> gate-users mailing list
>> gate-users at lphe1pet1.epfl.ch
>> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>>
>
> _______________________________________________
> gate-users mailing list
> gate-users at lphe1pet1.epfl.ch
> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>
>
>
> _______________________________________________
> gate-users mailing list
> gate-users at lphe1pet1.epfl.ch
> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>
_______________________________________________
gate-users mailing list
gate-users at lphe1pet1.epfl.ch
http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
More information about the Gate-users
mailing list