***[Possible UCE]*** Re:[gate-users] Re: gate-users Digest, Vol

[null99 at mails.tsinghua.edu.cn]

4, Issue 18
Content-Type: text/plain

Thank you!

Does this mean interfile is dedicated for SPECT application? Or Gate doesn't
implement it for PET application? Anyway I found no hint in the interfile 3.3
specification and the Gate mannule.

Regards,

Long
In your mail:
>From: Claude Comtat <comtat at ieee.org>
>Reply-To: GATE feedback and helpline for Users <gate-users at lphe1pet1.epfl.ch>
>To: null99 at mails.tsinghua.edu.cn,
  GATE feedback and helpline for Users <gate-users at lphe1pet1.epfl.ch>
>Subject: Re: ***[Possible UCE]*** Re:[gate-users] Re: gate-users Digest, Vol
4, Issue 18
>
>Dear Long,
> 
> the gate outputs are related to the selected system; the interfile 
> output has not been implemented for the ecat system. You can use the 
> "sinogram" output instead. To my understanding, the interfile output has 
> ben implemented for SPECT systems.
> 
> Rgrds, Claude
> 
> null99 at mails.tsinghua.edu.cn wrote:
> 
> >Dear Staelens,
> >
> >Thank you! I put them in the output section of
> >example_PET_Scanner/PET_Ecat_System.mac:
> >right after the line: 
> >/gate/output/root/setSaveRndmFlag 1
> >and I also tried to add before the line, delete the line, commend all other
output
> >line. However, it shows the same error information.
> >************Command not found*************
> >
> >Regards,
> >
> >Long Zhang
> >
> >
> >In your mail:
> >
> >>From: steven staelens <steven.staelens at ugent.be>
> >>Reply-To: GATE feedback and helpline for Users <gate-users at lphe1pet1.epfl.ch>
> >>To: gate-users at lphe1pet1.epfl.ch
> >>Subject: [gate-users] Re: gate-users Digest, Vol 4, Issue 18
> >>
> >>gate-users-request at lphe1pet1.epfl.ch wrote:
> >>
> >>>Send gate-users mailing list submissions to
> >>>        gate-users at lphe1pet1.epfl.ch
> >>>
> >>>To subscribe or unsubscribe via the World Wide Web, visit
> >>>        http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
> >>>
> >>>Please use the GATE's site webmaster e-mail to  reach the person
> >>>managing the list.
> >>>
> >>>Today's Topics:
> >>>
> >>>   1. Output interfile problem (null99 at mails.tsinghua.edu.cn)
> >>>
> >>>----------------------------------------------------------------------
> >>>
> >>>Message: 1
> >>>Date: Thu, 29 Jul 2004 12:54:16 +0800
> >>>From: null99 at mails.tsinghua.edu.cn
> >>>Subject: [gate-users] Output interfile problem
> >>>To: gate-users at lphe1pet1.epfl.ch
> >>>Message-ID: <291076857.21579 at mails.tsinghua.edu.cn>
> >>>Content-Type: text/plain
> >>>
> >>>Hi,
> >>>
> >>>I am using interfile output, but gate reported:
> >>>Command not found:
> >>>/gate/output/projection/enable
> >>>/gate/output/projection/projectionPlane YZ
> >>>
> >>hi Long,
> >>
> >>I don't immediately see any errors in those commads.  Are you sure you
> >>called them at the appropriate place in your macro?
> >>
> >>best regards,
> >>
> >>Steven
> >>
> >>Steven Staelens
> >>Ghent University
> >>ELIS Department
> >>Proeftuinstraat 86
> >>B-9000 Gent
> >>tel.  +32 9 264 66 28
> >>fax. +32 9 264 66 18
> >>Steven.Staelens at ugent.be
> >>
> >>
> >>>Command ignored
> >>>
> >>>Any hints?
> >>>
> >>>Thanks,
> >>>
> >>>regards,
> >>>
> >>>long
> >>>
> >>>------------------------------
> >>>
> >>>_______________________________________________
> >>>gate-users mailing list
> >>>gate-users at lphe1pet1.epfl.ch
> >>>http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
> >>>
> >>>End of gate-users Digest, Vol 4, Issue 18
> >>>*****************************************
> >>>
> >>_______________________________________________
> >>gate-users mailing list
> >>gate-users at lphe1pet1.epfl.ch
> >>http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
> >>
> >
> >
> >_______________________________________________
> >gate-users mailing list
> >gate-users at lphe1pet1.epfl.ch
> >http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
> >
> 
> 
> _______________________________________________
> gate-users mailing list
> gate-users at lphe1pet1.epfl.ch
> http://lphe1pet1.epfl.ch/mailman/listinfo/gate-users
>